MA-TD05 TDA8950SMPS Amplifier Module Class D 2X150W stereo / 300 W mono

This TDA8950SMPS module can achieve a power density of 1.5W / gram and an overall volume of only 20 inches has a power density of 18W.

It is the most compact powered amplifier in its class with output power is 2x150W under 4 Ohms or 2x75W under 8 Ohms.

The output power in BTL mode is 300W on the impedance of the 8 Ohm speakers.

All these powers are measured at <1% THD.

The supply voltage is 115V AC or 230V AC, 50 or 60Hz.

The input signal may be symmetrical or asymmetrical.
The amplifier has overvoltage, overcurrent and short-circuit protection.
The gain of the amplifier is 30dB in single-ended mode and 36dB in BTL mode.

The power transistors and rectifying diodes of the power supply section do not require a heat sink for operation with a music signal due to the high efficiency of the power supply.

Characteristics :

• Amplifier Module TDA8950SMPS
• Class D
• Dimensions: 150x56x45mm
• Power: 300 W under 8 ohms (BTL / mono) or 2x150W at 4 Ohms or 2x75W at 8 Ohms
• "Ploc" anti-ignition system
• Auxiliary output +/- 15V 250mA
• It is necessary to put it in contact with the case to improve dissipation (see diagram below)
• Weight: 240g

[Img-11394-left-thickbox_default]
[Img-11395-left-thickbox_default]