Find here all our DAC modules and audio interfaces designed to be associated with the Raspberry Pi or other SBC to extend its capabilities and performance.
The Allo Digione interfaces are currently the best digital SPDIF outputs to Raspberry Pi. They connect directly to the RPI by GPIO and provide digital transfer while correcting jitter characteristic of a bare SBC.
Audiophonics offers you the successor of the DAC I-Sabre 9028 now with the ES9038Q2M chip. The ES9038Q2M allows outstanding sound performance thanks to components selected to ensure the utmost accuracy and precision in playback without sounding aggressive.
This interface extends the capabilities of your Raspberry Pi by adding a range of digital audio output. It includes an optical output (SPDIF) with a connector already mounted, a coaxial output (SPDIF, this one has to be mounted with an RCA connector - not included) and an AES / EBU XLR already mounted with a Neutrik connector. Thanks to DigiPï +...
This Audiophonics DigiPi+I2S interface expands the output connectivity of a Raspberry Pi, giving it an additional panel of digital audio outputs. It includes a Toslink optical output and a coaxial output, but also an I2S LVDS output via HDMI. Thus, equipped with the DigiPi+I2S interface and an efficient software solution, your Raspberry Pi can be...
Direct successor to our famous DAC I-Sabre ES9038Q2M module, the EVO-SABRE 2x9038Q2M is a balanced version of the converter with a full range of connectors and input interfaces (SPDIF Coaxial and optical, USB, Bluetooth and I2S through GPIO). This version is more precise, more efficient and more versatile. It includes its own microcontroller, a digital...
This DAC HAT module will allow you to transform your Raspberry Pi into a real high quality audio system, without breaking the bank. It includes a balanced digital to analog conversion stage, equipped with two ESS ES9023 DAC chips, allowing it to read PCM audio streams up to 24bit 192kHz.
This DAC module for Raspberry is based on the use of a PCM5122 digital to analog conversion chip, allowing it to support PCM streams up to 32bit 384kHz and DSD128. It benefits from a complete connectivity, with I2S LVDS (HDMI), Optical Toslink, stereo RCA, 3.5mm headphone output and a coaxial input/output combo.
The HiFiBerry DAC+ DSP combines both a digital to analog converter based on a Burr Brown DAC chip - with a digital input and output, as well as an analog output - and a powerful 300MHz DSP processor. The latter, working with SigmaStudioStereo, will allow you to adapt the sound reproduction of the module to your listening and your equipment.
The HiFiBerry DAC2 ADC Pro is a digital/analog and analog/digital converter module specially designed for use with a Raspberry Pi (A+, B+, 2B, 3B, 3B+, 4B+, Zero, 5). This sound card therefore features both analog and digital inputs, offering a wide range of uses, whether for recording or audio playback.
The HiFiBerry DAC2 HD is a high-end digital to analog converter, dedicated to be used in combination with a Raspberry Pi (A+, B+, 2B, 3B, 3B+, 4B, Zero). It is a sound card for Raspberry Pi optimized to enjoy high quality audio playback at a low price.
The HiFiBerry DAC2 Pro XLR is a high resolution digital to analog and analog to digital converter, dedicated to be used in combination with a Raspberry Pi (A+, B+, 2B, 3B, 3B+, 4B+, Zero). It is a sound card for Raspberry Pi optimized to enjoy high quality audio playback at a low price.
The HiFiBerry DAC2 Pro is a high resolution digital to analog and analog to digital converter, dedicated to be used in combination with a Raspberry Pi (A+, B+, 2B, 3B, 3B+, 4B+, Zero). It is a sound card for Raspberry Pi optimized to enjoy high quality audio playback at a low price.
The HiFiBerry DAC8x is a high-resolution digital-to-analogue converter for the Raspberry Pi 5. It is a special sound card for the Raspberry Pi, optimised for a specific use case: high-quality audio playback at an affordable price.
The HiFiBerry Digi2 Pro V2.2 is a stereo SPDIF interface module designed to work with a Raspberry Pi. The assembly is very simple. In addition, the Digi2 Pro offers very good performance, including the integration of isolation on the output, low noise linear regulators or two low jitter clocks.
This adapter proposed by Ian Canada allows to connect the FifoPi (sold separately) to the Doede DDDAC module (not included) thanks to U.FL format connectors. This association allows an improvement of the sound quality of the DAC.
The Ian Canada DoP Decoder module is based on the use of an FPGA. It allows to convert DSD64 to DSD512 DoP streams into native DSD streams without any modification and can be used with many HAT DACs.
The Ian Canada FifoPi Q7 is the new flagship in the FifoPi family of reclockers. It achieves the best performance in terms of jitter and noise by using a number of latest-generation technologies.
This module allows you to recover the outgoing digital audio stream of the GPIO port of a Raspberry Pi (or one of its HATs) and send it to the balanced LVDS format on an HDMI port.
Ian Canada's HdmiPi Pro II is an I2S/DSD interface module via HDMI. It is the first solution to use a discrete 1bit LVDS driver to achieve the best HDMI signal quality and the lowest noise levels. The module also incorporates the highly acclaimed 1bit discrete secondary reclockers (similar to ReClockPi) to ensure very low jitter. In short, the HdmiPi Pro...
This I2S / DSD input adapter for FifoPi enables FifoPi to operate independently as a universal re-clocker. This module features a SIP connector (J6) and 3 U.FL connectors (J1, J2, J3) to receive the audio signal.
The Ian Canada OPA861 is a special transconductance operational amplifier with a very high slew rate of up to 900V/µS over a wide bandwidth up to 80MHz. The performance of the OPA861 is ultimately very similar to that of a super-transistor. In input current / output voltage mode with zero feedback, the input impedance can be less than 10Ω.
Ian Canada's ReceiverPi DDC is a compact, functional digital interface for integration into a Raspberry Pi-based network streamer, DDC or DAC project. It's a practical way of extending your project's digital connectivity. The module integrates numerous inputs: USB, coaxial SPDIF, Toslink optical and I2S via HDMI. It is capable of...
The Ian Canada ReceiverPi module was designed to extend the digital connectivity of DACs and streamers operating with a Raspberry Pi. The module includes an isolated Coaxial S/PDIF input, an Optical S/PDIF input, a GPIO input for the Raspberry Pi and an external I2S/DSD input.
Ian Canada's ReceiverPi Pro II is designed for Raspberry Pi-based DDC or DAC projects, to retrieve a digital audio stream from multiple sources rather than from the Raspberry Pi itself. The ReceiverPi Pro II can select a digital signal from any of the following inputs: coaxial, Toslink optical, I2S via HDMI or Raspberry Pi GPIO.
Ian Canada's ReceiverPi Pro is designed to fit Raspberry Pi based DACs and streamers and allows to extend their input connectivity. The module provides coaxial SPDIF, Toslink optical and I2S via HDMI while being able to receive the stream directly from the Raspberry Pi via GPIO.
With the TransportPi Digi II, Ian Canada has taken their high-performance all-in-one digital audio interface for the Raspberry Pi to the next level. This module delivers a high-quality signal with very low jitter and noise thanks to Ian Canada's proprietary 3-stage 1-bit discrete reclocking technology for SPDIF signals, and 2-stage multi-bit technology...
The TransportPi Digi is a high performance all-in-one digital audio interface for the Raspberry Pi. It provides ultra-low jitter and low noise signal quality using IAN CANADA's proprietary 3-stage 1-bit discrete reclocking technology for SPDIF signals, and 2-stage multi-bit for I2S signals.
The Ian Canada TransportPi MKII module is a low jitter digital audio interface compatible with the Raspberry Pi. It has been specifically designed in pure synchronous mode to achieve the best jitter performance. When combined with a Raspberry Pi and a FifoPi (sold separately), it creates an audiophile digital interface for Roon or other playback software....
This digital/analog conversion and amplification module for Raspberry Pi connects directly to the GPIO of the Raspberry Pi, allowing simple operation without special wiring. Although compact, the module integrates two TPA3126D2 amplifier chips capable of developing a power of 2x100W under 4Ω.