The Fosi Audio S3 Lite is a network transport designed to add high-resolution streaming to a Hi-Fi setup, without handling digital-to-analog conversion itself. It transmits streams up to PCM 32bit / 768kHz to an external DAC through its USB-A, optical, and coaxial outputs, while maintaining low digital distortion.
The DOUK AUDIO LAB TX7 is a multifunction desktop display combining a VU meter, audio spectrum visualizer, clock and screensaver, designed to provide a dynamic visual representation of the audio signal while also serving as a decorative element on a desk.
The Douk Audio D2 PRO is a 12 V linear power supply designed to provide a stable DC voltage to compatible Hi-Fi and digital devices. Its toroidal transformer, LM1085IT regulation and multi-stage filtering allow a maximum power of 35 W to be reached, with a ripple noise below 30 μV at no load.
The DOUK AUDIO T12 is a tube MM/MC phono preamplifier with an integrated headphone amplifier, designed for use with a turntable or various analog sources. It integrates two 6J5B-Q tubes operating with an anode voltage of 120 VDC, providing a warmer analog sound while maintaining a low level of distortion.
The DOUK AUDIO VFD253-PRO is a 4-channel RCA analog audio selector and distributor featuring a 25 × 15-segment VFD display for real-time visualization of the music spectrum. It can operate in 1 input / 4 outputs mode to distribute a source to one or more outputs, or in 4 inputs / 1 output mode to easily select one of four audio sources, with...
This passive volume controller adjusts the signal level without using an active amplification stage, allowing it to be simply placed between a source and an amplifier or another audio device. Its XLR and RCA inputs and outputs ensure compatibility with both balanced and unbalanced connections, while the independent adjustment of the left and right...
The DAN CLARK VIVO is a high-end balanced headphone cable developed by Dan Clark Audio, designed to replace the original cable of compatible headphones and provide a connection to a 4.4mm balanced Jack output.
The Ampapa H1 is a Class A headphone amplifier with preamplifier function, designed to drive a wide variety of headphones while integrating into a Hi-Fi setup. It delivers up to 4000 mW of power and relies on ECC83 tubes custom-made by PSVANE, combining substantial output headroom with a warmer sound reproduction.
The DD HIFI BC150G-BAL35 is a balanced headphone cable designed to connect a device equipped with a 4.4mm balanced Jack output to a pair of headphones, replacing their original cable.
The DD HIFI BC150G-LONG35 is a balanced headphone cable designed to connect a device equipped with a 4.4mm balanced Jack output to a pair of headphones, replacing their original cable.
The DSPeaker Anti-Mode X4 is a DAC, preamplifier and DSP equalizer designed to optimize the reproduction of a stereo system according to the room acoustics.
This source selector is a passive audio switcher with one XLR input and three XLR outputs, designed to manually route an analog signal to several devices. Its fully balanced circuit preserves conductor separation and limits sensitivity to interference, while the absence of a power supply and active stage maintains unity gain without any additional signal...
This passive source selector lets you manually manage several audio devices equipped with RCA connections, without power supply or active signal processing. Its bidirectional configuration allows connecting six inputs to two outputs, or two inputs to six outputs, in order to adapt routing to different stereo setups. With its unity gain, low insertion loss...
The LADDER CHOPIN is a fully discrete and balanced R2R line preamplifier, operating in pure Class A, designed to provide precise and transparent control of the analog signal in stereo Hi-Fi systems.
The LADDER CHOPIN is a fully discrete and balanced R2R line preamplifier, operating in pure Class A, designed to provide precise and transparent control of the analog signal in stereo Hi-Fi systems.
The DSPeaker Anti-Mode X4 is a DAC, preamplifier and DSP equalizer designed to optimize the reproduction of a stereo system according to the room acoustics.
The Ian Canada I/V STD II Advanced is an analog current/voltage stage designed for ESS DACs, tasked with converting the signal from their current output before routing it to the output stage. Its direct-coupled differential architecture integrates equally well in a balanced chain or an unbalanced configuration, while prioritizing linear reproduction and a...
The AUNE AR9000 is a high-end open-back dynamic headphone equipped with 50mm drivers and designed to deliver spacious, natural and dynamic sound reproduction.
The FiiO SNOWSKY WIND is a wired semi-open on-ear dynamic headphone, designed in a retro format inspired by the headphones of portable music players from the 1980s and 1990s.
The JRAUDIO PRO-3MAX is a professional audio ground isolator with XLR connectivity, designed to reduce hum, unwanted noise, and interference caused by ground loops in an audio system.
The Ian Canada HdmiPi Pro III is a digital transport interface dedicated to the transmission of I²S and DSD signals over HDMI. Its output stage uses discrete 1-bit LVDS drivers, combined with a secondary reclocking circuit that is also discrete, in order to limit noise and jitter during transfer to an external DAC. Operating exclusively in...
The Rliso Audio ISO-200S is a stereo transformer-based audio isolator designed to eliminate ground noise and interference generated by ground loops between different sources and electronics. Its two-channel architecture uses a double-shielded circuit as well as transformers made from a specific alloy, ensuring effective isolation between input and output...
The Dayton Audio Odeum 8N is a professional 20.32cm (8") mid-woofer designed for PA systems, stage monitors and custom speakers. Its neodymium motor, combined with a 5.08cm (2") voice coil mounted on a fiberglass former and a copper demodulation ring, delivers a power handling of 200 W RMS and 400 W peak while reducing distortion.
The MOONDROP CHU III is a pair of in-ear monitors (IEMs) equipped with a high-performance 10mm dynamic driver, designed to deliver precise audio reproduction across a wide bandwidth.
The Dayton Audio PA460-8 is a professional 45.72cm (18") woofer designed for instrument cabinets, sound reinforcement systems and custom builds, where its 500W RMS and 1,000W peak power handling allows it to deliver deep, dynamic bass. Its carbon fiber-impregnated paper cone combines rigidity and low mass, while the low-distortion motor, equipped with a...
The MOONDROP CHU III is a pair of in-ear monitors (IEMs) equipped with a high-performance 10mm dynamic driver, designed to deliver precise audio reproduction across a wide bandwidth.
The Shanling ET3 EVO is a top-loading digital CD transport designed to play discs, Hi-Res files and network streams before sending the signal to an external DAC. Its Ingenic X2000 platform, its upsampling system and its USB and I2S outputs allow conversion up to PCM 32bit / 768kHz and DSD512, while the AES/EBU, coaxial and optical outputs provide broad...
The FOSI AUDIO MERAK is a CD player with an integrated DAC and headphone amplifier, designed to provide precise CD playback while offering several integration options in a Hi-Fi or desktop system.
The FiiO FG3 is a closed-back gaming headphone with a dual coaxial dynamic driver, combining a 50 mm transducer for bass and midrange with a 16 mm model dedicated to treble. It integrates a DAC, a DSP and a headphone amplifier delivering up to 80 mW, with support for PCM signals up to 24bit / 192kHz to ensure accurate reproduction and coherent...
The Dayton Audio PSS555-8 is a professional bass speaker of 53.34cm (21"), featuring a 11.43cm (4.5") voice coil and designed to produce high sound pressure levels up to 1,000 W RMS at 8 ohms. Its linear excursion reaches 11 mm in each direction at 70% of BL, i.e. nearly 4 liters of displacement per stroke, while its sensitivity above 96 dB promotes...
The Dayton Audio Pro 18F is a professional 45.7cm subwoofer designed for sound reinforcement systems requiring a high output level and stable bass reproduction. Its 1200W RMS power handling, ferrite motor and 4-inch voice coil allow it to reach a sensitivity of 96.4dB, while ensuring a maximum linear excursion of 10.6mm to strengthen the impact and reach...
The Dayton Audio RST28A-4 is a 28.57mm (1-1/8") aluminum dome tweeter, designed to deliver clear and transparent reproduction with a sensitivity of 92.5 ±3 dB between 1.5 kHz and 20 kHz. Its diaphragm combines the precision of metal with a less pronounced behavior in the upper spectrum, while its low-distortion motor preserves the clarity of details.
The Dayton Audio RST28A-4 is a 28.57mm (1-1/8") aluminum dome tweeter, designed to deliver clear and transparent reproduction with a sensitivity of 92.5 ±3 dB between 1.5 kHz and 20 kHz. Its diaphragm combines the precision of metal with a less pronounced behavior in the upper spectrum, while its low-distortion motor preserves the clarity of details.
The Dayton Audio RST28F-4 is a 28.57mm (1-1/8") silk dome tweeter, designed to deliver clear and even reproduction thanks to a naturally damped diaphragm, a low resonance frequency and a sensitivity of 93.5 ±3 dB between 1.4 kHz and 20 kHz. Its tuned rear chamber, combined with a quality ferrofluid, extends the response in the lower treble range...
The Dayton Audio CE35-4 is a 25.4mm silk soft dome tweeter, designed to reproduce high frequencies over a range from 3500Hz to 17kHz. Its membrane ensures a clear and detailed treble reproduction, while its 90dB sensitivity and 4Ω impedance make it easy to pair with various speakers in a 2-way enclosure.
The Dayton Audio CE48-4 is a 2-inch (5.08cm) full-range speaker designed for compact applications, DIY projects, commercial integrations, custom audio devices, and artistic installations.
The Questyle QCC Dongle Pro2 is a compact Bluetooth audio transmitter designed to send sound from an iPhone, iPad, Mac, computer or other USB source to a compatible wireless headphone or speaker. Compared to the QCC Dongle Pro, this update extends protocol support with LDAC, aptX, aptX HD, aptX Adaptive, aptX Lossless, LHDC, LE Audio and Auracast, in...