Arcana 1877PHONO cable has an excellent manufacturing and finishing with quality Cinch RCA with OFC central pin, a high purity copper surface treatment and dual EMi RFi shielding.
The 1877Phono Hemi-X is a high-end headset cable. It includes a 3.5mm jack connector on the one hand and two Mini XLRs on the other, each of which of course has gold-plated contacts. The entire cable benefits from a flawless design quality, including OCC Copper conductors for optimal signal conductivity.
Here is the OCC Silver Dart power cable by 1877Phono, having OCC Crystal Copper conductors of 3x5.26mm². The latter is the culmination of 3 years of development and testing using their proprietary "H-Wound™.
3E Audio, a recognized player in the DIY world, now offers a Class D Stereo amplifier incorporating audiophile Hi-Fi components. The A5se amplifier is based on one TI TPA3251 chip in BTL configuration, and two dual NE5532 OPAs. This means it can deliver up to 2x140W into 4 ohm.
The 7HZ Timeless in-ear monitors feature a Planar Magnetic driver with an ultra-thin diaphragm and N52 neodymium magnets, providing fast response, excellent dynamic range and a controlled frequency range. They are therefore capable of accurate and detailed sound reproduction. Each earphone is clad in a precision CNC machined aluminum shell. These are both...
The 7HZ Timeless in-ear monitors feature a Planar Magnetic driver with an ultra-thin diaphragm and N52 neodymium magnets, providing fast response, excellent dynamic range and a controlled frequency range. They are therefore capable of accurate and detailed sound reproduction. Each earphone is clad in a precision CNC machined aluminum shell. These are both...
With the Salnotes Dioko, 7HZ has teamed up with Crinacle, renowned for its expertise in IEM, to offer in-ear monitors based on a Ø14.6mm planar magnetic driver and accompanied by a host of technologies to deliver a natural sound experience with transparent timbre and remarkable definition.
This extremely low phase noise crystal oscillator (< 100dBc @ 10Hz) is intended for professional recording equipment as well as audiophile electronics precision devices.
This extremely low phase noise crystal oscillator (< 90dBc @ 10Hz) is intended for professional recording equipment as well as audiophile electronics precision devices.
These aeco ABI-0611G speaker terminals offer excellent design quality. They use low-mass contacts made of high-purity tellurium copper with 10µ gold plating, ensuring both excellent conductivity and resistance to oxidation.
These high-quality AECO ABP-1111R banana plugs are sold in packs of 4 and feature an ingenious design incorporating top-of-the-range materials. The contacts of these banana plugs are made of 99% pure copper with rhodium plating for enhanced conductivity and resistance to corrosion and oxidation.
These high-quality AECO ABP-1111S banana plugs are sold in packs of 4 and feature an ingenious design incorporating top-of-the-range materials. The contacts of these banana plugs are made of 99% pure copper with 120µ silver plating for enhanced conductivity and resistance to corrosion and oxidation.
These high-quality aeco ASP-1931G spade plugs, sold in packs of 4, benefit from a rigorous design using top-of-the-range materials. The contacts, waved for better connection, are made of 99.9% pure copper with 10µ gold plating, ensuring both excellent conductivity and perfect resistance to oxidation.
These high-quality aeco ASP-1931R spade plugs, sold in packs of 4, benefit from a rigorous design using top-of-the-range materials. The contacts, waved for better connection, are made of 99.9% pure copper with rhodium plating, ensuring both excellent conductivity and perfect resistance to oxidation.
These high-quality aeco ASP-1931S spade plugs, sold in packs of 4, benefit from a rigorous design using top-of-the-range materials. The contacts, waved for better connection, are made of 99.9% pure copper with silver 120µ plating, ensuring both excellent conductivity and perfect resistance to oxidation.
The aeco AT3-1351R is a high-quality Jack 3.5mm TRS connector, designed using high-performance components for optimum transmission of the audio signal. Its contacts are CNC machined from a single piece of high purity tellurium copper with rhodium plating, ensuring excellent conductivity and limiting signal loss while protection it from oxidation.
The aeco AT3-1351S is a very high-quality Jack 3.5mm TRS connector, designed using high-performance components for optimum transmission of the audio signal. Its contacts are CNC machined from a single piece of high purity tellurium copper with 120µ silver plating, ensuring excellent conductivity and limiting signal loss.
The aeco AX4-1611R is a high-quality 4-pin XLR connector, designed using high-performance components for optimum transmission of the audio signal. Its contacts are made of high-purity tellurium copper with rhodiumplating, ensuring excellent conductivity and perfect resistance to oxidation.
AIYIMA's A70 is a 2.1-channel Class D amplifier featuring quality components. In fact, it incorporates a TI TPA3255 amplifier chip combined with two NE5532 AOPs for an output power of up to 2x 185W at 4 ohms. The AIYIMA A70 features an original vertical form factor and a complete connectivity interface located on the rear panel.
The Aiyima A8 is a small Class D amplifier that is powerful, efficient and affordable. It is based on an Infineon MA12070 amplifier chip and a NE5532DR PDO, allowing it to deliver 2x55W of power at 4Ω, with rich and dynamic sound reproduction. The front of the device incorporates a central volume control knob.
The Aiyima T9 is a versatile and affordable integrated amplifier, ideal for setting up an audio system without breaking the bank and without multiplying the number of devices. Its amplifier stage uses a TPA3250 chip associated with two 6K4 tubes, allowing it to develop a power of 2x60W under 4Ω with the supplied 24VDC power supply or 2x95W under...
The Aiyima T9 Pro is a versatile and affordable integrated amplifier, ideal for setting up an audio system without breaking the bank or multiplying the number of devices. Its amplifier stage uses a TPA3250 chip associated with two JAN5725 tubes, allowing it to develop a power of 2x60W under 4Ω with the supplied 24VDC power supply.
The Aiyima Tube-T3 is a simple and affordable phono preamplifier for MM turntables. It features two 6A2 tubes and a three level gain control, 39dB, 42dB and 45dB, allowing it to be integrated in most audio systems.
In order to dress and protect the trio composed by a Raspberry Pi 4, a DAC Katana, and the Isolator V1.3 Allo offers a specially designed translucent black acrylic housing.
This ALLO DigiOne signature reader has no screen and no control interface. It can be remotely controlled from a mobile phone, a tablet or any device capable of running an internet browser.
These Aluminium spike shoes will be perfect for installation under HiFi devices (amplifier, preamplifier, DAC...) or under speakers, in order to considerably limit the vibrations that could alter the performance of these audio systems.