The 1877Phono Cali headphone modulation cable offers a very nice build quality for optimal performance. The design is based on the use of two independent cables with PC-OCC copper conductors and TEF-FEP insulation.
This cable is a 4.4mm male jack to 4-pin female XLR adapter. The 10cm cable is made of pure silver-plated copper, ensuring optimal conductivity. In addition, the connector contacts are gold-plated, providing flawless protection against oxidation and corrosion.
This symmetrical adapter cable has a 4-pin XLR male connector and a 4.4mm female jack connector. It will therefore allow you to connect symmetrical high-end HiFi devices in order to enjoy the audio quality inherent in this type of transmission.
The Ampapa / Douk Audio 6.35mm TRS to XLR female cable is a high-quality balanced audio cable designed to ensure perfectly clean and distortion-free signal transmission. It allows efficient connection of HiFi or studio equipment such as DACs, amplifiers, audio interfaces or active speakers thanks to its 6.35mm TRS male jack to 3-pin XLR female connectivity.
The ATAudio AT-K002 cable is a high-quality interconnect cable equipped with a balanced 4.4mm stereo jack connector (TRRRS) on one end and balanced XLR connectors on the other. This cable is made of single-crystal OCC copper conductors for increased conductivity and features dual shielding.
The Audiophonics Wire range offers a selection of affordable yet high-performance cables, hand-assembled in our workshops in France. The Audiophonics Wire TRS 6.35mm jack to XLR cable features a Mogami Neglex W2549 interconnect cable, Neutrik NP3X-B TRS 6.35mm connectors and Neutrik NC3MXX-B male XLR connectors, ensuring excellent conductivity and...
These affordable cables are balanced male Jack 6.35mm TRS to male XLR 3-Pole interconnect cables. They are shielded and the conductors are made of 99.99% pure 4N OFC copper for increased conductivity.
These affordable cables are balanced 6.35mm TRS Male to XLR 3-Pole Male interconnect cables. They are shielded and the conductors are made of 99.99% pure 4N OFC copper for increased conductivity and a clear signal.
These affordable cables are balanced 6.35mm TRS Male to XLR 3-Pole Female interconnect cables. They are shielded and the conductors are made of 99.99% pure 4N OFC copper for increased conductivity and a clear signal.
These affordable cables are balanced 6.35mm TRS Male to XLR 3-Pole Female interconnect cables. They are shielded and the conductors are made of 99.99% pure 4N OFC copper for increased conductivity and a clear signal.
DD HiFi's BC44XLR is a 4.4mm jack to XLR 3-pin stereo cable that can be used for all your balanced output connections, such as, for example, a DAP to an amplifier or active drivers. The conductors making up this cable have been carefully selected to guarantee optimum signal transmission quality, so the positive signal passes through strands of 4N silver...
DD HiFi's BC44XLR is a 4.4mm jack to XLR 3-pin stereo cable that can be used for all your balanced output connections, such as, for example, a DAP to an amplifier or active drivers. The conductors making up this cable have been carefully selected to guarantee optimum signal transmission quality, so the positive signal passes through strands of 4N silver...
This E1DA cable is a XLR male 3-pin to 3.5mm jack adapter. The contacts of the 3.5mm jack connector are gold-plated and the cable has a total length of 15cm. This cable has been specially designed by E1DA to work with its E1DA COSMOS Scaler balanced preamplifier coupled with its COSMOS ADC/ADCiso or COSMOS APU.
iFi Audio unveils a beautifully designed balanced cable, consisting of one 4.4mm male jack and two 3-pin XLR connectors. The cable features OFHC copper conductors with a total cross section of 1.31mm² (16AWG).
This high-end balanced headphone cable has an extremely careful design using high-quality components. It consists of silver-plated 7N copper conductors, which are insulated and twisted together to ensure excellent conductivity and signal transmission. At the ends of this cable, there is a 4-pole male XLR connector and two 3.5mm mono male jack connectors....
This balanced Meze cable was specifically designed for use with headphones. It features an exceptional design, using Furukawa PCUHD copper conductors, ensuring incredible electrical conductivity for perfect audio signal transmission. Furukawa cables are known for their ability to provide open, yet highly detailed sound with perfectly controlled transients...
This balanced Meze cable was specifically designed for use with headphones. It features an exceptional design, using silver-plated Furukawa PCUHD copper conductors, ensuring incredible electrical conductivity for perfect audio signal transmission. Furukawa cables are known for their ability to provide open, yet highly detailed sound with perfectly...
This balanced Meze cable was specifically designed for use with headphones. It features an exceptional design, using Furukawa PCUHD copper conductors, ensuring incredible electrical conductivity for perfect audio signal transmission. Furukawa cables are known for their ability to provide open, yet highly detailed sound with perfectly controlled transients...
This balanced Meze cable was specifically designed for use with headphones. It features an exceptional design, using silver-plated Furukawa PCUHD copper conductors, ensuring incredible electrical conductivity for perfect audio signal transmission. Furukawa cables are known for their ability to provide open, yet highly detailed sound with perfectly...
This Meze cable was specifically designed for use with headphones. It features an exceptional design, using Furukawa PCUHD copper conductors, ensuring incredible electrical conductivity for perfect audio signal transmission. Furukawa cables are known for their ability to provide open, yet highly detailed sound with perfectly controlled transients and...
This Meze cable was specifically designed for use with headphones. It features an exceptional design, using silver-plated Furukawa PCUHD copper conductors, ensuring incredible electrical conductivity for perfect audio signal transmission. Furukawa cables are known for their ability to provide open, yet highly detailed sound with perfectly controlled...
This high-end Oyaide HPSC-X63 cable has a 6.35 jack connector and a 3-pin Mini XLR connector. It has mainly been designed to replace defective or inferior cables on headsets with this type of connector, such as the AKG K712PRO, Pioneer HDJ-2000, etc.
This 1.5m long HBA-3SM2 Sommercable cable has two XLR 3-pin male mono connectors and a gold-plated 3.5mm jack connector. Particularly useful for connection to a mixer.
The Topping Professional T6RFX-150 cable is a 6.35mm jack to XLR cable specially designed to connect a microphone to the brand's M62 audio interface. It ensures excellent conductivity thanks to OFC copper conductors and gold-plated contacts.
The TCT3 cables from Topping are high quality male Jack 6.35mm TRS to female XLR 3 poles cables. They integrate 6N copper and 6N silver plated copper conductors ensuring a perfect signal transmission. Each conductor has a section of 0.533mm² (19AWG). The contacts of the connectors are gold plated in order to maintain an excellent...
The TCT3 cables from Topping are high quality male Jack 6.35mm TRS to female XLR 3 poles cables. They integrate 6N copper and 6N silver plated copper conductors ensuring a perfect signal transmission. Each conductor has a section of 0.533mm² (19AWG). The contacts of the connectors are gold plated in order to maintain an excellent...