New Customer?
Create your accountNo products
Prices are tax included
Input Selector Board 4 Channel with Display and Remote Control CS3310
By buying this product you get 4 loyalty points
![[GRADE B] FIIO K9 PRO ESS DAC 2x ES9038PRO Headphone Amplifier 2x THX-AAA 788+ Bluetooth aptX-HD LDAC 32bit 384kHz DSD256 MQA](https://www.audiophonics.fr/60594-thumb_default/fiio-k9-pro-ess-dac-2x-es9038pro-headphone-amplifier-2x-thx-aaa-788-bluetooth-aptx-hd-ldac-32bit-384khz-dsd256-mqa.jpg)
Accessories for this product
Find here a selection of useful and/or essential accessories for this product. These are specially selected by the Audiophonics team according to the characteristics of the product.
Input Selector Board
4 Channel with Display and Remote Control
This module consists of a source selector with 4 stereo RCA inputs and an analog output on a 2.54mm XH connector, as well as a VFD display. The management of the audio streams is entrusted to a Cirrus Logic CS3310 16bit chip, ensuring low distortion. The display can show 9 digits and a potentiometer on its right side allows to switch on/off the module, to select an active source or to adjust the volume level. The supplied remote control also allows remote access to these functions.
The connector near the relays is in parallel with RCA input 1 (IN1). If you have an internal source such as a Bluetooth module, you can assign it to IN1 (the RCA input is then no longer usable).
The P5 connector allows you to modify the maximum output level.
P5 ON : 31.5dB maximum output level.
P5 OFF : 0dB maximum output level.
The P3 connector corresponds to the memory mode at start-up.
P3 ON : Start-up state on IN1 and level at -46dB.
P3 OFF : Start up at the last state with switch off.
The J1 connector allows a manual control by button (a contact to the ground of each line is enough).
MUTE : Mute mode.
1-2-3-4 : Direct selection of inputs 1, 2, 3 and 4.
V- : Volume -
V+ : Volume +.
Technical characteristics
| Specifications | |
|---|---|
| Product type | Input selector module |
| Inputs | 4x Stereo RCA |
| Output | 1x XH 2.54mm analog output |
| Display | VFD |
| Remote control | (2x AAA 1.5V batteries required, sold separately) |
| Frequency response | 20Hz - 20kHz |
| Rated current | 500mA |
| Control mode | SPI |
| Channel crosstalk | -130dBFS |
| Dynamic range | -120dB |
| THD+N | 0.0004% @ 1kHz |
| General | |
|---|---|
| Power supply | 12V AC (sold separately) |
| Input selector board dimensions | 177 x 59mm |
| Input selector board mounting holes spacing | 144 x 31.5mm |
| Display board dimensions | 168 x 37.5mm |
| Display board mounting holes spacing | 161 x 30.5mm |
| Weight | 200g |
| Package | 1x Input selector board 1x Display 1x Remote control 1x Audio output cable 1x Interface cable for selector/display modules 1x Button (random color) |
We deliver all over France, and internationally.
To find out the amount of shipping costs, simply go to your cart once you have added the desired products.
To discover our different services and delivery options, click on the following logos :
No reviews at this time.
English 
Français 
