This SPDIF switch has three inputs and one output in Toslink optical format. It allows you to multiply the number of sources for the same output, and to easily select the active source, either with the button on the front of the device, or via the remote control provided.
This symmetrical adapter cable has a 4-pin XLR male connector and a 4.4mm female jack connector. It will therefore allow you to connect symmetrical high-end HiFi devices in order to enjoy the audio quality inherent in this type of transmission.
This adapter and DAC features a male USB-C connector on one end and a female 3.5mm jack and female USB-C connector on the other end. This makes it ideal for connecting headphones or earphones to a smartphone that doesn't have a 3.5mm jack audio output, while also featuring a female USB-C input so you can recharge your phone, even while you're listening.
This adapter and DAC features a male USB-C connector on one end and a female 3.5mm jack and female USB-C connector on the other end. This makes it ideal for connecting headphones or earphones to a smartphone that doesn't have a 3.5mm jack audio output, while also featuring a female USB-C input so you can recharge your phone, even while you're listening.
This adapter and DAC features a male USB-C connector on one end and a female 3.5mm jack and female USB-C connector on the other end. This makes it ideal for connecting headphones or earphones to a smartphone that doesn't have a 3.5mm jack audio output, while also featuring a female USB-C input so you can recharge your phone, even while you're listening.
This adapter features a female HDMI connector and a male USB-C connector. Its careful design and integrated Synaptics VMM7100 chip enable it to support video streams up to 8K 60Hz, 4K 120/144Hz and 2K 240Hz. It is also compatible with the HDR standard.
This adapter has a 2.5mm TRRS female jack connector and a 3.5mm TRRS male jack connector. The contacts are made of a gold-plated copper alloy, ensuring both good conductivity and resistance to oxidation.
This adapter and impedance transformer will allow you to convert a 110Ω AES/EBU signal into a 75Ω coaxial SPDIF signal and thus to connect devices with these connectors. It integrates a battery with a life of about 5h and recharges via its USB-C port.
This adapter and impedance transformer will allow you to convert a 75Ω SPDIF coaxial signal into a 110Ω AES/EBU signal and thus to connect devices with these connectors. It integrates a battery with a life of about 5h and recharges via its USB-C port.
This adapter is a 2.5mm male to 3.5mm female mono jack adapter. The adapter's contacts are gold-plated for enhanced conductivity and resistance to oxidation and corrosion. Ideal for connecting mono audio devices or triggers.
This adapter consists of a 4.4mm male jack and a 4-pin female XLR connector. It can be used to connect symmetrical high-end headphones to symmetrical amplifiers. The adapter benefits from a very good design quality with 24k gold plated contacts, ensuring both excellent conductivity and oxidation resistance.
This adapter has a 6.35mm mono (TS) male connector on one side and a 3.5mm mono (TS) female connector on the other. Its gold-plated contacts ensure good conductivity and resistance to corrosion and oxidation.
This handy USB-C male to USB-C male adapter has a special 180° angled format, allowing you to connect a small portable DAC or amplifier to a smartphone, while keeping both devices together and without additional cables. In addition, the adapter is OTG.
As its name suggests, this SOP8 to DIP8 adapter enables SOP8 OPAs to be used with DIP8 brackets. The SOP8 CMS OPAs are simply inserted into the upper part of this adapter, thanks to a cap that holds them in place.
This USB-A female to USB-A male adapter will allow you to enjoy a USB extension with an angle, ideal for some specific integrations. In addition, the USB 3.0 standard connector will provide a high transfer rate, up to 5Gbit/s.
This ADC module allows to convert an analog audio signal into digital thanks to its Burr Brown PCM1804 chip. The input is in stereo RCA and the output in coaxial or optical Toslink. The module supports PCM audio streams up to 24bit 192kHz.
This adhesive cable tie simply attaches to a wall to allow you to group your cables together. The base of the cable tie is adhesive and can therefore be easily attached to any surface. However, two holes allow the fastener to be screwed in for a firmer hold.