ADC Analog to Digital Converter AKM5720 I2S 24Bit / 96kHz

ADC Analog to Digital Converter 24Bit / 96kHz I2S

Average votes for this product
5.0 / 5

By buying this product you get 1 loyalty point


Reference : 13351
New product

13,25 €tax excl.

Available  

- +

Shipping date: 18-11-2019.

Orders placed before 1pm (GMT+1) will be shipped the same day (working day).

Produit garantie 2 ans
 
More info

ADC module I2S

ADC I2S 24Bit / 96kHz


to analog converter I2S


This module allows to interface a stereo analog signal to a high resolution digital signal.

The signal obtained at the output is encoded in PCM 96kHz via I2S, which makes it compatible with digital filtering equipment demanding in terms of audio.

Its primary function is to enable digital filtering, parametric equalization or any other process regarding  acoustic correction of a listening room through a digital processor.

Secondarily, this converter is also useful for connecting an analog source to a full digital amplifier (FDA) or any other device operating with digital inputs only.

RCA input


The analog input is on two ports RCA (right / left).

These have a tinned conductor with gold plating to improve the overall conductivity and improve the accuracy of the signal.

Moreover, an auxiliary (AUX) input on Port 3.5mm female is available.

Similarly, drivers of this entry have a gold plating and a thought construction for high-quality audio.

RCA port on ADC
AKM5720

Chip ADC AKM5720


The A / D conversion takes place through a 24-bit chip AKM5720. The latter is capable of sampling an analog signal to a digital signal of a frequency of 96 kHz.

Its dynamic range offers a very convenient interval of 94dB with a signal to noise ratio of 102dB.

The signal output is done on bare pins with 2.54mm spacing.

Digital filters

ADC with digital filters


This component has its own gain amplifier 0dB + / + 15dB. It does not need a secondary amplifier stage thus  requiring less circuitery to work at optimal conditions.

It also has its own range of basic digital filters: Sharp Roll-Off, Short Delay Sharp-Roll Off.

All parameters can be configured easily with a selector mounted on the surface of the PCB.

Accessories

ADC Module


This ADC module comes with spacers and screws that are needed for a full mounting.

The necessary wiring cables are also provided.

mclckon.jpg

Built-in clock / slave mode


The module has its own built-in 24.576MHz clock.

To use the module as a stand-alone, a jumper is included with the PCB. Just mount this jumper as shown on the illustrating photography in order to connect the output of the integrated clock OUT to the MCLK IN input.

mclckoff.jpg


On the other hand, one can also remove the jumper to inject an external clock into the MCLK IN inlet.

This module can then be used stand-alone as well as in slave mode.

Although this is not its primary function, it is also possible to split the integrated clock output to send it to other modules or devices.

Dimensions & spacing

ADC module dimensions and spacers
Spécifications
Product typeADC
ChipAKM5720
Inputs1x Stereo RCA
1x Jack 3.5mm (AUX)
OutputDigital on I2S pins
Sampling ratePCM up to 24bit 96kHz
Input level1.8Vpp @ VA = 3V
3Vpp @ VA = 5V
S/(N+D)94dB
DR, S/N102dB
Digital filtersSharp Roll-Off
Short Delay Sharp Roll-Off
Masterclock256fs / 384fs / 512fs / 768fs
Gain0dB / +15dB
Power supply4.2 - 5VDC
Dimensions34.2 x 57.5mm
Weight12g
 
Data sheet
InputJack 3.5mm
InputRCA
OutputI2S
Max sampling rate96kHz
 
Delivery
We deliver all of France, and internationally.
To discover the amount of the shipping costs, you just have to go in your shopping cart once the desired products added.
To discover our different services and delivery options, click on the following logos:
Colissimo - TNT - SoColissimo
Only registered users can post a review. Log in or create an account .
Average votes
5.0 / 5
2 reviews
Why write products reviews ?
You can share your feelings about products and help other people by sharing your experience

Note :
 5/5
Date :
@Günter L.

I'm looking for the same thing, but I need to use it with HiFiBerry Dac+ Dsp to apply Dsp filters; and I could not figure out how to use this ADC with Dac+ Dsp. Do you have any doc that you could share?
 (0)
 (0)
This review has been posted for ADC Analog to Digital Converter AKM5720 I2S 24Bit / 96kHz
Note :
 5/5
Date :
Very good product with good price
I was searching for such a product for a long time (analog to I2S) . Here it is and I can execute an analog input for my raspberry project. The sound is very good and it works fine connected to an I2S Input of my dac.
 (0)
 (0)
This review has been posted for ADC Analog to Digital Converter AKM5720 I2S 24Bit / 96kHz
 

Write a review !


*



Customers who bought this product also bought:

No products

To be determined Shipping
0,00 € Tax
0,00 € Total

Check my cart