This USB-C cable to bare wires (red, black) is dedicated to powering devices (chargers, smartphones, and other devices with USB-C). It has a length of 25cm and a section of 22AWG (0.326mm²).
This angled micro-USB cable is designed for power-supply (Raspberry Pi, other SBC, PCB ... etc.) It is ideal for all types of projects and DIY assembling that need a micro-USB connector
This power cable has a 5.5/2.5mm female DC jack connector and a 6.3/3mm male DC jack connector. It will allow you to connect your device with this last connection.
This quality power cable has a 5.5/2.5mm DC jack connector and a GX16 connector (or aviation connector) 2 female poles. The conductors of this cable are made of 4N OFC Copper to ensure excellent conductivity of the electrical signal
This power supply circuit module has two 30mm diameter slots to install Snap-In capacitors with a capacity of 10000µF and a voltage of 63V. The input and output have screw terminals for quick and easy mounting.
This double (±) power supply module can accommodate 2 electrolytic capacitors 63V 10000µF of 35mm diameter (sold separately) for filtering. The module integrates a 25A diode bridge and a 2x5A Omron relay.
The SBooster AIB is a compatibility interface module for the Bluesound Node X / N130 streamer. This SBooster AIB module allows you to upgrade the power supply of your Bluesound device for greatly improved performance by making it compatible with SBooster power supplies.
This Trustfire 18650 Lithium-Ion battery has a capacity of 3400mAh and a nominal voltage of 3.7V. It will provide your devices with a perfectly clean and stable power supply. What's more, it features a complete protection system (PCB 7A) against overvoltage, undervoltage, short-circuit and reverse polarity.
This ultracapacitor power filter module enables you to supply a clean 5-24V DC current to power your devices, and supports a maximum current rating of 10A. It is made up of no less than 10 high-quality WIMA supercapacitors.
This voltmeter will allow you to monitor the voltage of a device. Its blue LED display is easy to read. The voltmeter accepts voltages from 60VAC to 500VAC. Its connection is simplified by a screwing system.
This voltmeter will allow you to monitor the voltage of a device. Its green LED display is easy to read. The voltmeter accepts voltages from 5VDC to 60VDC. Its connection is simplified by a screwing system.
This voltmeter will allow you to monitor the voltage of a device. Its green LED display is easy to read. The voltmeter accepts voltages from 60VAC to 500VAC. Its connection is simplified by a screwing system.
This voltmeter will allow you to monitor the voltage of a device. Its red LED display is easy to read. The voltmeter accepts voltages from 60VAC to 500VAC. Its connection is simplified by a screwing system.
This Wondom AA-AA11466 aluminum mounting bracket is L-shaped for quick and easy wall mounting. It is specially designed for amplifier or battery power PCBs measuring 6“ by 4.5” (15.24cm x 10.16cm).