This NO type switch has two luminous yellow switches, each with two positions. The mounting is snap-in type and is done simply with blade connectors or via a few welds. This switch can be integrated in a wide variety of DIY installations
This connector is compatible with Ø19mm push buttons and monostable/bistable switch. It allows to quickly mount a button / switch without soldering or screwing anything. This connector has 7 x 15 cm wires and is suitable for the majority of switches with RGB LED.
The ON/OFF switch by Ian Canada comes complete with mounting nut and washers. Can be connected directly to a LinearPi to make it as a master to start a whole ON/OFF control chain. A PH2.0 2Pin 15cm control cable is supplied. Can also be used to control the ON/OFF of other power supplies, but may need to cut one end of the cable and solder the...
1NO type switch with blue indicator light. Operates from a bistable mechanism (two positions). The connectors dedicated to the signal / power supply can support a voltage of 220V. Those dedicated to the power supply of the indicator light (LED) can accept voltages between 5 and 24V.
1NO type switch with red indicator light. Operates from a bistable mechanism (two positions). The connectors dedicated to the signal / power supply can support a voltage of 220V. Those dedicated to the power supply of the indicator light (LED) can accept voltages between 5 and 24V.
This type of switch is mainly used at the power supply input of a device to select the voltage to be applied, 110V or 220V AC, depending on the voltage delivered by your electrical network.
This two-pin push button is supplied with a 15mm diameter aluminium button. It has two possible positions and supports a voltage of 250 V and a continuous current of 5 A. This push button is ideal for your DIY projects and assemblies, for example to control the switch-on of your device.
This 1NO1NC stainless steel bistable switch allows easy integration into your DIY projects. It has a white light circle that visually indicates the status of the button.
This 1NO type switch in PA66 operates with a bi-stable mechanism (two positions) and features a red indicator light (LED). The connectors dedicated to the signal/power supply can handle a maximum voltage of 36V and a current of 1A.