New Customer?
Create your accountNo products
Prices are tax included
By buying this product you get 11 loyalty points
Fountek is a manufacturer of ribbon tweeters.
These tweeters are of the highest quality, with damping under the faceplate, neodymium magnets, high efficiency and linear frequency response.
Fountek ribbon tweeters feature a transformer to enable the ribbon, which has only 0.02 Ohm of original impedance, to be connected to an amplifier with the correct impedance.
The Fountek-Neo series has a thick ribbon (0.02mm) and can be used with a 12 dB/oct. filter.
Characteristics :
113.5mm x 69mm rectangular faceplate
Fountek’s 3rd generation ribbon driver technology
12mm width enforced sandwich ribbon diaphragm
Higher power handling, lower distortion, very fast transition
Strong Neodymium magnet
Built-in impedance convertor
Sensitivity 94dB/1m/2.83v
Power handling 25W nominal,43W max
Frequency range 1,200-40,000Hz
Nominal impedance 8 ohm
DCR 0.02 ohm
Ribbon dimension 12mmX60mmX0.015mm
Effective ribbon area 720 square millimeter
Ribbon weight 27 milligram
Gap flux 0.4 Telsa average
Gap height 13 millimeter
recommend cut frequency 2,500Hz with 2-order
Net.Weight 750 gram
Speaker Power (W RMS) | 25.0 |
Speaker Type | Ribbon tweeter |
Impedance (Ω) | 8 |
Loudspeaker diameter (mm) | 60.0 |
Diaphragm type | N/A |
Efficiency / Sensitivity (dB) | 94.0 |
Max Linear Excursion (Xmax) (mm) | N/A |
Lowest frequency (Hz) | 1200 |
Highest frequency (Hz) | 40000 |