The change in sound blew me away The change in sound blew me away! I connected the reclocker between my internet radio and the DAC via Toslink (optical cable)....
Small device - big sound A very good sounding and funny transport. Compared to my Sony CDP-XA20ES (also used as transport) it has a bit more airy sound...
This small, practical and compact 1Mii Lavaudio DS220 Bluetooth 5.1 receiver brings wireless connectivity to your HiFi system. Its high-quality design is based on the combination of a Qualcomm 5125 Bluetooth receiver and an ES9018Q2M DAC chip, enabling you to enjoy precise sound reproduction even when wireless.
AIYIMA's A70 is a 2.1-channel Class D amplifier featuring quality components. In fact, it incorporates a TI TPA3255 amplifier chip combined with two NE5532 AOPs for an output power of up to 2x 185W at 4 ohms. The AIYIMA A70 features an original vertical form factor and a complete connectivity interface located on the rear panel.
The Aiyima A8 is a small Class D amplifier that is powerful, efficient and affordable. It is based on an Infineon MA12070 amplifier chip and a NE5532DR PDO, allowing it to deliver 2x55W of power at 4Ω, with rich and dynamic sound reproduction. The front of the device incorporates a central volume control knob.
The Aiyima T9 is a versatile and affordable integrated amplifier, ideal for setting up an audio system without breaking the bank and without multiplying the number of devices. Its amplifier stage uses a TPA3250 chip associated with two 6K4 tubes, allowing it to develop a power of 2x60W under 4Ω with the supplied 24VDC power supply or 2x95W under...
The Aiyima T9 Pro is a versatile and affordable integrated amplifier, ideal for setting up an audio system without breaking the bank or multiplying the number of devices. Its amplifier stage uses a TPA3250 chip associated with two JAN5725 tubes, allowing it to develop a power of 2x60W under 4Ω with the supplied 24VDC power supply.
The Aiyima Tube-T3 is a simple and affordable phono preamplifier for MM turntables. It features two 6A2 tubes and a three level gain control, 39dB, 42dB and 45dB, allowing it to be integrated in most audio systems.
The AMP35 integrated amplifier is an affordable, high-performance Class AB amplifier that will integrate easily into a Hi-Fi installation thanks to its sober, elegant and compact design. Its amplification power is 2x30w into 4Ω, so it's capable of driving a large number of speakers.
The Audalytic AH90 is a DAC offering excellent decoding performance and precise sound reproduction, thanks to a careful and intelligent design. And it's reasonably priced for what it delivers. As well as using top-of-the-range components, such as an AKM AK4499EX DAC chip or an XMOS XU316 USB interface, the AH90 boasts comprehensive connectivity, even...
Audio-GD once again presents the quintessence of audio technology with its HE series products (here the HE-1 MK3), an evolution of the MASTER series. They have benefited from the longest design and testing period in the history of the famous brand.
The R-28 Audio-GD is an all-in-one unit of rare versatility that merges in a single housing a very high quality full R-2R DAC with a discreet balanced preamplifier and a high precision headphone amplifier.
This is the 5V 3.5A Audiophile regulated power supply for any device running on USB port. It is specially dedicated to the Raspberry Pi2 and 3. This power supply includes a Hexfet IRF controller of series 34Z driven by low-noise OP Analog-Device and not an integrated circuit.
The S10N represents the next generation of Aune streamer, adopting an architecture based on five core: NXP Freescale™ processor, MediaTek™ WiFi streamer, LDAC / aptX HD Bluetooth receiver, PLL clock and asynchronous FPGA. A quality structure perfectly optimized to deliver high fidelity sound reproduction, both locally and wirelessly. And if...
The Aune S1c is a high-performance external clock with an optimized audio architecture, including an OCXO oscillator and an FS-1 frequency synthesizer designed by Titans Audio Lab, with efficient power supply and signal isolation.
The Yuki SE from Aune is a portable DAC that doubles up as a headphone amplifier thanks to an amplification stage made up of discrete components. This DAC is based on an ES9280AC Pro chip for signal conversion up to PCM 32 bit 765kHz and DSD512, and uses 16 transistors in 4 different channels to deliver an output power of 90mW at 30Ω while...
The BerryBak HEV250 is a versatile device designed to enhance your home theater listening experience. It integrates a TAS5768 I2S AMP IC amplifier as well as a speaker output on a Phoenix male connector and Bluetooth 5.0 functionality thanks to a Qualcomm QCC3034 chip. This little device is capable of delivering 2x 36W @ 4 ohm (THD+N=1%) and supports...
The CEN.GRAND 9I-90SA PRO is a versatile device since it fulfills the functions of DAC / Headphone amplifier / Preamplifier. It has good performance and integrates an ESS9039 PRO dac chip working in parallel connection on two channels. Four types of outputs are available for headphone listening to match the impedance level required on different...
The 9I-92SA III from CEN.GRAND, known as the "Golden Trush", is a versatile device that performs the functions of DAC, headphone amplifier and pre-amplifier. As a high-end product, it incorporates many high-quality features, such as two ESS ES9038PRO DAC chips that can operate in parallel on 8 channels, and an XU208 + FPGA USB interface using an isolation...
Created by CEN.GRAND, the DSDAC 1.0 SUPERCLOCK is a DAC based on DSD technology. It is different from most DACs on the market, in fact the DSDAC 1.0 can increase the frequency of any digital input signal, including PCM and DSD64, up to DSD 1024. If the signal is equal to or greater than the DSD128 you can also choose not to increase the frequency of...
This adapter integrates a male Lightning MFI connector and a female 3.5mm jack. It also embeds an ES9318C DAC allowing it to support high sampling rates up to PCM 32bit 384kHz, DSD256 and DoP128. This chip also ensures a precise and detailed sound reproduction, with a very low noise level. The cable itself benefits from a beautiful design, composed of...
The M130B cable from ddHiFi is an all-in-one headphone cable, which as well as offering signal transmission via an OCC copper core, includes an ES9603Q chip that acts as a DAC and headphone amplifier. Not only does this cable offer digital/analogue conversion at a sampling rate of up to PCM 384kHz, it also boasts an output power of 45mW+45mW at 32Ω.
Following on from the TC44B, TC44C and TC44Pro portable DACs for smartphones, DD HiFi unveils the TC44Pro E2, the fourth generation in its range. It features a male lightning connector and a balanced female 4.4mm jack. It features not one, but two CS43131 DACs.
The Denafrips Hyperion is a totally discrete, balanced power amplifier, benefiting from a particularly well-designed Class AB architecture. The Hyperion is capable of delivering 2x80W into 8Ω or 2x150W into 4Ω, while offering magnificent musicality and dynamics. Each channel is equipped with 4 pairs of output transistors.
Denafrips Terra is a master clock generator designed for high-end audio applications. It features precision OCXO crystal oscillators (45.1548MHz, 49.152MHz), powered by a high-current, multi-stage linear power supply with an oversized O-Core transformer. As a result, Denafrips Terra delivers a highly accurate and stable clock signal that considerably...
The AMP-F2, developed by EverSolo in collaboration with the Starke Sound team, is a Class D amplifier based on the integration of the latter's innovative NS600 module. As a result, it offers a high energy reserve, great dynamics and a highly accurate sound. The all-new SAPS switch-mode power supply provides the audio circuit with a clean electrical...
Eversolo presents with its DMP-A6 MASTER EDITION a streamer as powerful as it is intuitive and stylish. It will allow you to stream your music with ease while enjoying excellent sound quality, all controlled via a high-quality LCD screen and an ergonomic interface or from a dedicated mobile application.This UPGRADE version introduces three improvements to...
With the M17, FiiO presents a high-end digital music player, a true flagship of the brand and capable of an incredible sound reproduction. It embeds optimized circuits in a balanced architecture based on the use of two ES9038Pro DACs, taking care of the digital / analog conversion. These ensure a rich and precise sound while allowing the support of high...
With the DA2120C, Fosi Audio offers a versatile and affordable Class D amplifier. Its amplification stage allows it to deliver a power of 2x90W under 4Ω, and this with a high efficiency.
Featuring an excellent 32-bit ES9038Q2M digital-to-analog conversion chip, the DAC FX-Audio D01 offers excellent audio performance with a wide dynamic range, low distortion, and jitter reduction. The USB interface uses a second-generation XMOS XU208 chip, supporting high sample rates up to 32bit 768kHz PCM and DSD512 with a custom Thesycon driver.
FX-Audio's DAC-M1 is a compact, affordable and powerful digital-to-analog converter. It is based on the use of an ESS ES9038Q2M DAC chip, associated with an XMOS XU208 USB interface, allowing for the support of high-resolution audio streams, up to PCM 32bit 768kHz and DSD512, while offering great sound transparency.
With its DAC-SQ3, FX-Audio offers a small, compact, affordable and powerful DAC. Featuring an ESS ES9038Q2M digital-to-analog conversion chip, it offers accurate playback and supports high sampling rates, up to 32bit 384kHz PCM and DSD256.
FX-Audio unveils its DS07 balanced DAC, a compact, high-performance device with an original appearance. FX-Audio's DS07 is made from a complete range of audiophile components: an ES9068AS DAC chip, an XMOS XU-216 USB interface, a QCC5125 Bluetooth 5.1 receiver chip and no fewer than 5 OPA1612 AOPs. These components enable this...
With its H26, Gustard unveils a class-A balanced audiophile preamplifier/headphone amplifier featuring discrete components. It features 8 pairs of power transistors, two dual LME49720 AOPs, two toroidal transformers, a relay volume control matrix and a balanced architecture.
The Gustard N18 network switch features 2 RJ45 Ethernet ports and an SFP optical fiber connector. The RJ45 ethernet ports are based on 10/100/1000Base-T and 1000base-X standards, while the SFP port supports GPON/EPON protocols.
This passive remote-controllable preamplifier with dual attenuators with 1% accuracy SMD resistors offers the latest in sound reproduction refinement. Both passive preamplifier and selectors of 5 sources and 4 outputs, this device with its aluminium and wood finish will convince. It is equipped with very high quality components assembled by hand with the...
The AP80 Pro-X from Hidizs is a compact and powerful digital music player, benefiting from both a neat design and quality components. Behind a 2.45" IPS touch screen are two ESS ES9219C DACs, a powerful FPGA, a Bluetooth chip and a large battery. The AP80 Pro-X is as versatile as it is efficient in terms of sound reproduction.
The S8 Pro Robin from Hidizs is a portable balanced DAC and headphone amplifier combo based on two Cirrus Logic CS43131 converter chips and capable of delivering 160mW + 160mW at 32 Ω. Furthermore, the device supports sampling rates up to PCM 32 bit 384kHz and DSD256. Moreover, this device has dual balanced and unbalanced outputs to suit all applications.