-TWEETER 25MM DAYTON AUDIO NDFA-4-
Tweeter dome Neodynium Magnet 4Ω ⌀ 25mm

This soft dome tweeter offers an excellent level of detail and respectable power thanks to its heat sink in a compact format. The small front plate and the small neodymium magnet motor allow the design without front edge for example for better off-axis impulse response, with an exceptionally flat frequency response that is easy to filter from 3000 Hz.
Its affordable price also allows the design of 6-channel speakers in MTM from Appolito or acoustic line. This tweeter is equipped with a copper coating on its polar part lowering the eddy currents (reduction of distortion and inductance). The 25mm copper coil has a Ferrofluid treatment increasing the permissible power.


Technicals caracteristics
| Specifications |
|---|
| Loudspeakers Type | Tweeter |
| Voice coil | 25mm (1") |
| Material | Inpregnated Soft dome |
| Magnet material | Neodynium |
| Voice coil material | Copper |
| Total diameter | 66mm |
| Overall depth | 36mm |
| Power | RMS : 20W MAX : 40W |
| Impedance | 6Ω |
| Sensitivity | 90dB @ 1W/1m |
| Response Frequency | 2500Hz - 25kHz |
| DC resistance | 3.2Ω |
| Inductance voice coil (Le) | 0.03mH |
| Resonnance frequency (Fs) | 1350Hz |
| Mechanical Q (Qms) | 3.87 |
| Electrical Q (Qes) | 2.61 |
| Total Q (Qts) | 1.56 |