These Brass spacers have a 3mm long M3 thread and a 4mm long body. Ideal for all your projects and DIY mounting on PCB (printed circuit board) or other. High quality machining.
These Brass spacers have a 3mm long M3 thread and a 5mm long body. Ideal for all your projects and DIY mounting on PCB (printed circuit board) or other. High quality machining.
These Brass spacers have a 3mm long M3 thread and a 6mm long body. Ideal for all your projects and DIY mounting on PCB (printed circuit board) or other. High quality machining.
These Brass spacers have a 3mm long M3 thread and a 8mm long body. Ideal for all your projects and DIY mounting on PCB (printed circuit board) or other. High quality machining.
This VH 3.96 cable consists of two 7-pole female connectors and cables of Ø1.8mm diameter. These cables have a cross-section of 0.5mm² (AWG20) and are each made up of 21 strands of Ø0.11mm.
Ideal for simplifying and making reliable the interconnections you need for DIY PCB projects. This cable consists of a 3.96 female VH connector and two bare wires.
This XH 2.54mm female interconnect cable has 3 conductors. There are 3 XH2.54mm connectors without housings on each side of the cable. Its 30cm length makes it ideal for wiring complex, bulky devices, or those with a connector layout that requires a certain margin.
DeoxIT D100P is a contact and connector cleaner that also improves conductivity. It is recommended for use on "non-critical" metal surfaces that are or may be subject to severe oxidation and corrosion. It serves as both treatment and protection.
DeoxIT DN5S-6N is a connector and contact cleaner that also improves conductivity. The advantages of this cleaning spray are that it's quick-drying, drip-free and avoids overspray. It is therefore recommended for sensitive parts and equipment; appliance interiors, vintage equipment with aging ABS plastic, etc.
DeoxIT F5S-H6 spray precisely lubricates and cleans control knobs and moving contacts such as potentiometers, faders, switches and other control mechanisms.
DeoxIT Gold G5S-6 is a connector and contact-plated cleaner that also improves conductivity. It is particularly effective on gold, but also on base metals and other precious metal contacts and connections (gold, silver, rhodium, copper, bronze, nickel, etc.).
DeoxIT X10S-P oiler pen is ideal for precision lubrication of thin rubber, plastic or metal part mechanisms. The oil in this precision pen has long-lasting, non-gumming, rust-proof lubricating properties.
CAIG RSF-R80-8G is a rosin solder flux specially designed to make complex solder joints and simplify the soldering process on electronic components SMD (surface-mounted component).
This Canare TCD-35D crimping die has been specially manufactured in Sweden for the Canare TC-1 crimping tool. It has 3 holes: 1.92mm / 7.6mm / 5.85mm. It is perfectly matched to the following Canare connectors: BP-C3, BP-C4, BP-C5, TNP-C3, TNP-C4, TNP-C5, RCAP-C3GS.