Psvane ACME 300B tubes are high-end triode power tubes offering exceptional audio performance with a timeless analogue sound. This version of the 300B tubes features gold plating on the control grid for maximum heat dissipation and undergoes meticulous burn-in by Psvane.
Psvane ACME 2A3 tubes are high-end triode power tubes offering exceptional audio performance with a typically analogue sound. This version of the 2A3 tubes features gold plating on the control grid for maximum dissipation and undergoes meticulous burn-in by Psvane.
The CrinEar Protocol Max portable headphone amplifier and DAC is a device based on audiophile components to meet the needs of a demanding audience. It is based on two CS43198 DAC chips for digital-to-analog conversion and dual SGM8262-2 OPAmps for amplification. The Protocol Max is therefore capable of supporting sampling rates up to PCM 32bit 384kHz and...
With the SS18-22, Dayton Audio presents a 45.72 cm dual voice coil subwoofer driver. Designed for high-power applications, it combines an anodised aluminium cone with a triple magnet optimised by FEA simulation and a dual spider suspension to deliver 1300W RMS power output into 4Ω over a frequency range of 20 to 400Hz.
These Flagship Kimbers speaker terminal are designed using high-quality materials. Their contacts are made of pure copper, while the clamping nut is made of brass and their body is made of black steel. The result is a robust speaker terminal with high conductivity.
The XDA019 amplifier module is a stereo module capable of delivering up to 2x 100W under a 4-ohm impedance load. It is based on high-quality components such as two TDA7293 high-power transistors for amplification, two Rubycon 63V 10000uF capacitors for power supply, and an Omron protection relay to ensure the integrity of your speakers.
This Dayton Audio BR-1 kit allows you to build your own Hi-Fi bookshelf speakers. They are based around a DC160-8 bass driver and a DC28FL-8 silk dome tweeter. Once assembled, the bookshelf speakers can deliver a maximum power of 100W under 8Ω with a frequency response of 43Hz to 18kHz.
The Dayton Audio 800-HPF-8 is a passive high-pass speaker filter with a 12 dB/octave slope centred at 800 Hz. Designed to restrict the bandwidth of a speaker with a smooth, gentle slope, it can be combined with a low-pass filter of the same frequency to form a second-order Linkwitz-Riley filter, ensuring a perfectly neutral response at the crossover...
The Vezzoso DSP Deluxe is a digital interface designed to optimise the digital audio signal before its analogue conversion. Placed between a digital source (CD player, audio server, etc.) and a DAC, this device performs two essential functions: signal reclocking and oversampling to reduce jitter and improve the fidelity of the digital stream.
Topping's MA4s are two-way active monitor speakers combining 50W+25W Class D amplification with an acoustic architecture that does not use digital processing. Their design emphasises linearity, directivity control and the reduction of internal resonances, making them a solution that is equally suited to working environments and more open spaces.
Topping's MA4s are two-way active monitor speakers combining 50W+25W Class D amplification with an acoustic architecture that does not use digital processing. Their design emphasises linearity, directivity control and the reduction of internal resonances, making them a solution that is equally suited to working environments and more open spaces.
This Audiophonics WIRE AES/EBU cable, assembled directly in our workshops in France, offers high-quality design at an affordable price. It features a Sommercable CARBOKAB 110 Ohm shielded cable composed of two 0.25mm² copper conductors. The cable is terminated with a Neutrik NC3FXX-B and a Neutrik NC3MXX-B connector. These 3-pin XLR connectors...
This Audiophonics WIRE AES/EBU cable, assembled directly in our workshops in France, offers high-quality design at an affordable price. It features a Sommercable CARBOKAB 110 Ohm shielded cable composed of two 0.25mm² copper conductors. The cable is terminated with a Neutrik NC3FXX-B and a Neutrik NC3MXX-B connector. These 3-pin XLR connectors...
This Audiophonics WIRE AES/EBU cable, assembled directly in our workshops in France, offers high-quality design at an affordable price. It features a Sommercable CARBOKAB 110 Ohm shielded cable composed of two 0.25mm² copper conductors. The cable is terminated with a Neutrik NC3FXX-B and a Neutrik NC3MXX-B connector. These 3-pin XLR connectors...
This Audiophonics WIRE AES/EBU cable, assembled directly in our workshops in France, offers high-quality design at an affordable price. It features a Sommercable CARBOKAB 110 Ohm shielded cable composed of two 0.25mm² copper conductors. The cable is terminated with a Neutrik NC3FXX-B and a Neutrik NC3MXX-B connector. These 3-pin XLR connectors...
The Audiophonics Wire range offers a selection of affordable yet high-performance cables, hand-assembled in our workshops in France. The Audiophonics Wire RCA to XLR cable consists of a Mogami Neglex W2549 modulation cable and Amphenol ACPR male RCA connectors and Neutrik NC3FXX-B female XLR connectors, ensuring excellent conductivity and durability for...
The Audiophonics Wire range offers a selection of affordable yet high-performance cables, hand-assembled in our workshops in France. The Audiophonics Wire RCA to XLR cable consists of a Mogami Neglex W2549 modulation cable and Amphenol ACPR male RCA connectors and Neutrik NC3FXX-B female XLR connectors, ensuring excellent conductivity and durability for...
The Audiophonics Wire range offers a selection of affordable yet high-performance cables, hand-assembled in our workshops in France. The Audiophonics Wire RCA to XLR cable consists of a Mogami Neglex W2549 modulation cable and Amphenol ACPR male RCA connectors and Neutrik NC3FXX-B female XLR connectors, ensuring excellent conductivity and durability for...
The SMSL R1 is a high-performance headphone amplifier DAC with a unique look. It uses an ES9018K2M DAC chips for high-quality digital-to-analog conversion. It also offers several additional features, such as four equalization modes and bass and treble controls, allowing you to tailor the sound to your preferences.
The SMSL R1 is a high-performance headphone amplifier DAC with a unique look. It uses an ES9018K2M DAC chip for high-quality digital-to-analog conversion. It also offers several additional features, such as four equalization modes and bass and treble controls, allowing you to tailor the sound to your preferences.
If you have high-end audio devices connected in a network, then it is essential to use quality Ethernet cables to allow your devices to deliver their full potential. With its Premier SE Ethernet, Pangea offers RJ45 cables using top-of-the-range materials and a careful design to ensure excellent performance.
With the IM4, FOSI Audio unveils its first dynamic in-ear monitors. These feature a 10mm diameter diaphragm, dual N52 magnet arrays, and a dual acoustic cavity for balanced sound reproduction. Their 21-ohm impedance coupled with 109dB sensitivity makes the IM4 easy to drive for a high level of compatibility.
With the IM4, FOSI Audio unveils its first dynamic in-ear monitors. These feature a 10mm diameter diaphragm, dual N52 magnet arrays, and a dual acoustic cavity for balanced sound reproduction. Their 21-ohm impedance coupled with 109dB sensitivity makes the IM4 easy to drive for a high level of compatibility.
With the LAN II, Moondrop presents stainless steel in-ear monitors featuring a 10mm dynamic driver with a glass diaphragm. These headphones are unique in that they are available in two versions with different frequency responses: POP and REF. Here, the REF version offers more accentuated high-mids, perfect for instrumental and classical music.
With the LAN II, Moondrop presents stainless steel in-ear monitors featuring a 10mm dynamic driver with a glass diaphragm. These headphones are unique in that they are available in two versions with different frequency responses: POP and REF. Here, the POP version offers more accentuated low-mids, perfect for pop music.
The FiiO K15 is a versatile device that acts as a DAC, headphone amplifier and network audio player. Digital-to-analogue conversion is handled by a pair of AKM AK4497SVQ chips, supporting files up to PCM 32bit 768kHz and DSD512. For its amplification stage, the K15 uses a discrete Class AB architecture with MJE243G and MJE253G transistors to deliver an...
The FiiO Melody is a small, portable USB DAC and headphone amplifier with a unique design and an attractive wooden housing. Its digital-to-analog conversion stage is equipped with two CS43131 DAC chips, enabling it to support sampling rates up to PCM 32-bit 384 kHz and DSD256.
The FiiO K15 is a versatile device that acts as a DAC, headphone amplifier and network audio player. Digital-to-analogue conversion is handled by a pair of AKM AK4497SVQ chips, supporting files up to PCM 32bit 768kHz and DSD512. For its amplification stage, the K15 uses a discrete Class AB architecture with MJE243G and MJE253G transistors to deliver an...
The FiiO Melody is a small, portable USB DAC and headphone amplifier with a unique design and an attractive wooden housing. Its digital-to-analog conversion stage is equipped with two CS43131 DAC chips, enabling it to support sampling rates up to PCM 32-bit 384 kHz and DSD256.
The FiiO K13 is a versatile device that acts as both a DAC and headphone amplifier. Digital-to-analogue conversion is handled by a balanced R2R resistor network, supporting files up to PCM up to 32bit 384kHz and DSD256. For its amplification stage, the K13 uses OPA1642 and TPA6120A chips in a balanced arrangement for a total output power of up to 2x2400mW...
The WiiM Sound Display is a connected speaker with a screen. It is a two-way speaker with a 100W amplification system powering its three speakers. It also incorporates a range of wireless connection technologies such as WiFi 6E and DLNA, Chromecast, Spotify Connect, and Bluetooth 5.3 protocols supporting the LC3 high-definition codec.
The FiiO K13 is a versatile device that acts as both a DAC and headphone amplifier. Digital-to-analogue conversion is handled by a balanced R2R resistor network, supporting files up to PCM up to 32bit 384kHz and DSD256. For its amplification stage, the K13 uses OPA1642 and TPA6120A chips in a balanced arrangement for a total output power of up to 2x2400mW...
The WiiM Sub Pro is an active connected subwoofer offering 250W of Class D power. It delivers deep, powerful bass and integrates seamlessly into the WiiM ecosystem thanks to its advanced connectivity. It features WiFi 6E connectivity, an RJ45 Ethernet port, and Bluetooth 5.3.