The Topping DX9 DISCRETE is an R2R DAC/headphone amplifier with even better performance than its predecessor, the DX9, which was based on AKM technology. the DX9 DISCRETE is based on a balanced PSRM circuit with 16 elements per channel combined with R2R resistor networks, as well as an AK4118 optical receiver chip and an XMOS XU-316 USB interface,...
The Dayton Audio KABD-PMV4 is a mounting panel kit designed for KABD series amplifier modules. It includes all the controls and connectors needed for clean and functional integration of an amplifier into a cabinet. The painted steel panel incorporates four potentiometers (volume, grain and tone controls), a power switch, a 3.5 mm jack input, a DC power...
The Dayton Audio CF18N-4 tweeter speaker combines cutting-edge technology and ergonomics thanks to a compact form factor that facilitates implementation in a three-way project or confined spaces such as a car without sacrificing high-fidelity sound reproduction.
The Dayton Audio LBB-3v2 power module is a turnkey solution for reliably powering portable battery-powered projects. It accepts three 18650 lithium-ion batteries (not included) and provides a regulated 12V DC output capable of delivering up to 5A. Thanks to its pre-wired JST connectors, installation requires no soldering.
The Dayton Audio CF50N-4 midrange speaker combines a 2-inch carbon fiber dome with a high-energy neodymium motor to deliver accurate midrange response from an incredibly compact enclosure.
The FiiO FT13 is a high-performance closed-back dynamic headphone with an exceptional design and stunning Purpleheart wood ear cups. Its meticulous design, featuring large 60mm drivers, delivers rich, precise sound with a wide soundstage.
The FiiO FT13 is a high-performance closed-back dynamic headphone with an exceptional design and stunning Purpleheart wood ear cups. Its meticulous design, featuring large 60mm drivers, delivers rich, precise sound with a wide soundstage.
The Silkline Zuki III is a balanced DAC based on a combination of two Analog Device AD1955 analog conversion chips and an XMOS XU-208 USB interface. This configuration allows it to support sampling rates up to PCM 32-bit 192kHz with the possibility of 8x oversampling up to 768kHz for a most enjoyable listening experience.
The Diluvio™ AQ339-100 underwater speaker from Clark Synthesis is the only underwater speaker in the world to offer full frequency and total fidelity. Private pool enthusiasts, amateur swimmers, and competitive swimmers agree that the Diluvio™ transforms any pool experience into something truly spectacular.
The Aquasonic isolation transformer is specially designed for use when a non-conductive connection is required between an underwater loudspeaker and the audio amplifier.
The Dayton Audio KABD-250 module is an amplifier module capable of delivering up to 2x 50W into 4Ω thanks to a TPA3116 chip. In addition, this module incorporates a DSP chip to give you complete control over the final sound. Finally, for maximum convenience, this module also includes a Bluetooth 5.0 chip that supports aptX HD, aptX LL, SBC and AAC codecs.
The Hidizs MK12 Turris are single dynamic driver in-ear headphones designed to deliver balanced and accurate sound reproduction. They feature a large 12mm driver with a 91% magnesium diaphragm, combined with a 1.5 Tesla magnetic circuit. This design aims to optimize diaphragm rigidity while reducing harmonic distortion.
The Hidizs MK12 Turris are single dynamic driver in-ear headphones designed to deliver balanced and accurate sound reproduction. They feature a large 12mm driver with a 91% magnesium diaphragm, combined with a 1.5 Tesla magnetic circuit. This design aims to optimize diaphragm rigidity while reducing harmonic distortion.
The high-quality LDOVR LT3094-79XXG regulator ensures very low noise (0.8Vrms) and very low dropout voltage. This model is compatible with LM337 regulators and is therefore an ideal replacement solution.
The high-quality LDOVR LT3094-79XXG regulator ensures very low noise (0.8Vrms) and very low dropout voltage. This model is compatible with LM337 regulators and is therefore an ideal replacement solution.
The high-quality LDOVR LT3094-79XXG regulator ensures very low noise (0.8Vrms) and very low dropout voltage. This model is compatible with LM337 regulators and is therefore an ideal replacement solution.
The high-quality LDOVR LT3094-79XXG regulator ensures very low noise (0.8Vrms) and very low dropout voltage. This model is compatible with LM337 regulators and is therefore an ideal replacement solution.
Psvane ACME 300B tubes are high-end triode power tubes offering exceptional audio performance with a timeless analogue sound. This version of the 300B tubes features gold plating on the control grid for maximum heat dissipation and undergoes meticulous burn-in by Psvane.
Psvane ACME 2A3 tubes are high-end triode power tubes offering exceptional audio performance with a typically analogue sound. This version of the 2A3 tubes features gold plating on the control grid for maximum dissipation and undergoes meticulous burn-in by Psvane.
The CrinEar Protocol Max portable headphone amplifier and DAC is a device based on audiophile components to meet the needs of a demanding audience. It is based on two CS43198 DAC chips for digital-to-analog conversion and dual SGM8262-2 OPAmps for amplification. The Protocol Max is therefore capable of supporting sampling rates up to PCM 32bit 384kHz and...
With the SS18-22, Dayton Audio presents a 45.72 cm dual voice coil subwoofer driver. Designed for high-power applications, it combines an anodised aluminium cone with a triple magnet optimised by FEA simulation and a dual spider suspension to deliver 1300W RMS power output into 4Ω over a frequency range of 20 to 400Hz.
These Flagship Kimbers speaker terminal are designed using high-quality materials. Their contacts are made of pure copper, while the clamping nut is made of brass and their body is made of black steel. The result is a robust speaker terminal with high conductivity.
The XDA019 amplifier module is a stereo module capable of delivering up to 2x 100W under a 4-ohm impedance load. It is based on high-quality components such as two TDA7293 high-power transistors for amplification, two Rubycon 63V 10000uF capacitors for power supply, and an Omron protection relay to ensure the integrity of your speakers.
This Dayton Audio BR-1 kit allows you to build your own Hi-Fi bookshelf speakers. They are based around a DC160-8 bass driver and a DC28FL-8 silk dome tweeter. Once assembled, the bookshelf speakers can deliver a maximum power of 100W under 8Ω with a frequency response of 43Hz to 18kHz.
The Dayton Audio 800-HPF-8 is a passive high-pass speaker filter with a 12 dB/octave slope centred at 800 Hz. Designed to restrict the bandwidth of a speaker with a smooth, gentle slope, it can be combined with a low-pass filter of the same frequency to form a second-order Linkwitz-Riley filter, ensuring a perfectly neutral response at the crossover...
The Vezzoso DSP Deluxe is a digital interface designed to optimise the digital audio signal before its analogue conversion. Placed between a digital source (CD player, audio server, etc.) and a DAC, this device performs two essential functions: signal reclocking and oversampling to reduce jitter and improve the fidelity of the digital stream.
Topping's MA4s are two-way active monitor speakers combining 50W+25W Class D amplification with an acoustic architecture that does not use digital processing. Their design emphasises linearity, directivity control and the reduction of internal resonances, making them a solution that is equally suited to working environments and more open spaces.
Topping's MA4s are two-way active monitor speakers combining 50W+25W Class D amplification with an acoustic architecture that does not use digital processing. Their design emphasises linearity, directivity control and the reduction of internal resonances, making them a solution that is equally suited to working environments and more open spaces.
This Audiophonics WIRE AES/EBU cable, assembled directly in our workshops in France, offers high-quality design at an affordable price. It features a Sommercable CARBOKAB 110 Ohm shielded cable composed of two 0.25mm² copper conductors. The cable is terminated with a Neutrik NC3FXX-B and a Neutrik NC3MXX-B connector. These 3-pin XLR connectors...
This Audiophonics WIRE AES/EBU cable, assembled directly in our workshops in France, offers high-quality design at an affordable price. It features a Sommercable CARBOKAB 110 Ohm shielded cable composed of two 0.25mm² copper conductors. The cable is terminated with a Neutrik NC3FXX-B and a Neutrik NC3MXX-B connector. These 3-pin XLR connectors...
This Audiophonics WIRE AES/EBU cable, assembled directly in our workshops in France, offers high-quality design at an affordable price. It features a Sommercable CARBOKAB 110 Ohm shielded cable composed of two 0.25mm² copper conductors. The cable is terminated with a Neutrik NC3FXX-B and a Neutrik NC3MXX-B connector. These 3-pin XLR connectors...
This Audiophonics WIRE AES/EBU cable, assembled directly in our workshops in France, offers high-quality design at an affordable price. It features a Sommercable CARBOKAB 110 Ohm shielded cable composed of two 0.25mm² copper conductors. The cable is terminated with a Neutrik NC3FXX-B and a Neutrik NC3MXX-B connector. These 3-pin XLR connectors...
The Audiophonics Wire range offers a selection of affordable yet high-performance cables, hand-assembled in our workshops in France. The Audiophonics Wire RCA to XLR cable consists of a Mogami Neglex W2549 modulation cable and Amphenol ACPR male RCA connectors and Neutrik NC3FXX-B female XLR connectors, ensuring excellent conductivity and durability for...
The Audiophonics Wire range offers a selection of affordable yet high-performance cables, hand-assembled in our workshops in France. The Audiophonics Wire RCA to XLR cable consists of a Mogami Neglex W2549 modulation cable and Amphenol ACPR male RCA connectors and Neutrik NC3FXX-B female XLR connectors, ensuring excellent conductivity and durability for...
The Audiophonics Wire range offers a selection of affordable yet high-performance cables, hand-assembled in our workshops in France. The Audiophonics Wire RCA to XLR cable consists of a Mogami Neglex W2549 modulation cable and Amphenol ACPR male RCA connectors and Neutrik NC3FXX-B female XLR connectors, ensuring excellent conductivity and durability for...
The SMSL R1 is a high-performance headphone amplifier DAC with a unique look. It uses an ES9018K2M DAC chips for high-quality digital-to-analog conversion. It also offers several additional features, such as four equalization modes and bass and treble controls, allowing you to tailor the sound to your preferences.
The SMSL R1 is a high-performance headphone amplifier DAC with a unique look. It uses an ES9018K2M DAC chip for high-quality digital-to-analog conversion. It also offers several additional features, such as four equalization modes and bass and treble controls, allowing you to tailor the sound to your preferences.
If you have high-end audio devices connected in a network, then it is essential to use quality Ethernet cables to allow your devices to deliver their full potential. With its Premier SE Ethernet, Pangea offers RJ45 cables using top-of-the-range materials and a careful design to ensure excellent performance.
With the IM4, FOSI Audio unveils its first dynamic in-ear monitors. These feature a 10mm diameter diaphragm, dual N52 magnet arrays, and a dual acoustic cavity for balanced sound reproduction. Their 21-ohm impedance coupled with 109dB sensitivity makes the IM4 easy to drive for a high level of compatibility.
With the IM4, FOSI Audio unveils its first dynamic in-ear monitors. These feature a 10mm diameter diaphragm, dual N52 magnet arrays, and a dual acoustic cavity for balanced sound reproduction. Their 21-ohm impedance coupled with 109dB sensitivity makes the IM4 easy to drive for a high level of compatibility.