This small DAC module is ideal for integration in a DIY audio project. It will allow you to convert an I2S signal to input and then output to stereo RCA or 3.5mm jack. The digital/analog conversion is done thanks to an ESS ES9018K2M chip, offering good performances for a precise sound restitution. It also allows the support of high resolution streams, up...
This adapter integrates a male Lightning MFI connector and a female 3.5mm jack. It also embeds an ES9318C DAC allowing it to support high sampling rates up to PCM 32bit 384kHz, DSD256 and DoP128. This chip also ensures a precise and detailed sound reproduction, with a very low noise level. The cable itself benefits from a beautiful design, composed of...
Dayton Audio's BCT-3 is a Ø35mm, 15W, 4Ω exciter driver. This exciter has been developed with the aim of being used as a bone conduction transducer. To do this, simply attach the BCT-3 to a moulded headrest to enjoy the vibratory stimulus. You can also use the BCT-3 as a more conventional exciter, in which case all you have to do is stick it...
The Dayton Audio CP80TW is a in-ceiling speaker designed for professional fixed installations. Its 2-way architecture combines a 203mm (8‘) polypropylene cone woofer and a 13mm (0.5’) PEI dome tweeter, housed in an integrated metal rear enclosure. This design ensures consistent load volume, minimises acoustic leakage and provides greater sound...
The Dayton Audio D1057T is a horn speaker driver featuring robust materials and design. It is a model recognised by installers and audio professionals. It uses a phenol-impregnated cloth diaphragm to provide a clean, articulate sound. A cast aluminium front panel, plastic rear housing with gasket and stainless steel parts ensure long-term reliability for...
Offering high efficiency and low distortion, Dayton Audio's DMA45-4 is a 3.8cm-diameter full-range aluminum cone speaker driver that can be used for a wide range of modern loudspeaker designs. Whether you're designing a portable Bluetooth speaker, a soundbar, a compact desktop speaker or even a high-output line array, the DMA45-4 is the perfect speaker.
The DAYTON AUDIO DS115-8 from the Designer series has been developed specifically for the speaker designer. It's a range of affordable and attractive loudspeakers that emphasizes performance.
This woofer belongs to the Designer Series from Dayton Audio. It is suitable for all speaker construction / repair / modification projects. The meticulous design of this range ensures that each loudspeaker will hold its rated power at the lowest frequencies without exceeding its linear excursion capacity.
A passive radiator with aluminum membrane of good quality, designed to fit most of 25cm speaker modernization projects or repair. It has a 11mm excursion, allowing to emphasize the low end without distorting the dynamics of sound. It may therefore be integrated easily into ambitious and powerful speaker projects.
Exciter technology offers a universal and affordable alternative to conventional speakers, allowing sound reproduction virtually anywhere you want it. Dayton Audio's 2-hole mounting vibrators can be used in a multitude of DIY applications.
Exciter technology offers a universal and affordable alternative to conventional speakers, allowing sound reproduction virtually anywhere you want it. Dayton Audio's 2-hole mounting vibrators can be used in a multitude of DIY applications.
This horn allows you to tune a high-frequency driver to your listening space without distortion thanks to its unconventional geometric shape and low expansion rate. It ensures accurate reproduction and an open sound stage, allowing you to reveal the full potential of your tweeters.
These Dayton Audio OPAL1 2-way bookshelf speakers offer excellent sound reproduction thanks to a quality design that pays close attention to detail, coupled with a MMAG midbass driver and a silk dome tweeter. The OPAL1 can deliver up to 200W RMS of power. To get the best out of them, Dayton Audio recommends using an amplifier capable of delivering between...
The Dayton Audio OS-2S speaker stand offers a stable base with decoupling spikes. Thanks to 4 mounting points and sturdy spikes, each stabilizer is able to bear up to 90kg (200lbs) of load.
The Dayton Audio PM180-8 bass-midrange driver is based on the same design type as the Point Source broadband driver range. It will allow the design of multi-way loudspeakers with a wide frequency band reproduced in the midrange and lowrange midrange.
The Dayton Audio PPA800DSP is an amplifier module capable of developing 800W of power, separated into 2 channels: 600W for low frequencies, 200W for high frequencies. The PPA800DSP incorporates a DSP allowing it to be an excellent amplifier for mounting a configurable 2-way active speaker.
Dayton Audio presents its Odeum range of high-end professional loudspeakers. The Pro 15 is a bass/midrange driver of incredible performance. It is based on a careful, intelligent design, enabling it to be installed in demanding systems requiring high power reproduction with fidelity.
The Fountek PS220 full-range loudspeaker has the particularity of producing both bass and articulate, balanced midrange, as well as extended highs. The full-range concept eliminates the need for passive filtering (capacitors, chokes) for a highly musical sound. The loudspeakers in this range are thus capable of high sensitivity and smooth response.
This Dayton Audio SPA250DSP features both a 250W Class D Subwoofer amplifier and a Subwoofer DSP, allowing you to control your subwoofer efficiently and accurately.
Dayton Audio's TT20-8 is a small, 8-ohm exciter or mini bass shaker that transfers low-frequency sound waves directly to the listener by exciting surfaces with which the listener's body is in contact. This can represent a significant improvement in terms of immersion within a home-cinema installation.
This second order (12dB/octave) 3-way crossover filter has been designed with a 3 octave spacing between crossover points. Dayton Audio metallized polyester film capacitors and an 18AWG section coil are used on the midrange and treble channels. A 20AWG coil is used for bass. These coils keep DC resistance to a minimum.
This BC50B cable benefits from a high quality design, incorporating silver plated OCC 7N braided copper conductors. These ensure excellent conductivity and are insulated to significantly reduce the impact of interference on the signal. The cable integrates on one hand a balanced 2.5mm jack connector and on the other hand two MMCX connectors.
This resolutely high-end balanced MMCX to 2.5mm jack cable is assembled by hand from 99.9999% purity OCC copper conductors themselves, composed of 22 strands x 4 x 0.08mm.
The Nyx Net Pentaconn DD HIFI headphone cable features a high-end design with audiophile-grade materials. It features a balanced, gold-plated 4.4mm jack termination and DD HIFI's proprietary interchangeable connector system, allowing the user to choose between an MMCX or CIEM 0.78mm connection.
This DD BC35B cable is equipped with a 3.5mm jack connector on both sides. With a length of 10cm, it is ideal for short interconnections, as for example for the connection of a DAP. It also benefits from an excellent manufacturing quality, with pure silver, OFC copper and silver plated copper Litz wire conductors.
This high-quality DD DJ65M adapter features a male Jack 3.5mm stereo connector and a female Jack 6.35mm TRS connector. This model uses robust Neutrik connectors with gold-plated copper contacts, ensuring excellent conductivity and resistance to oxidation.
This DD TC07BA USB cable is a high-quality USB-B to USB-A cable. Part of the Nyx version 2.0 series, it features silver shielding and double insulation in PE NUC and PVC for optimum conductivity and interference resistance.
This DD TC07BL USB cable is a high-quality USB-B to Lightning cable. Part of the Nyx version 2.0 series, it features silver shielding and double insulation in PE NUC and PVC for optimum conductivity and interference resistance. It features two conductors, a pure silver DATA conductor and a pure OFC copper charge conductor. The USB connectors on this cable...
This DD HIFI TC07F adapter features a male USB-C connector and a female USB-A connector with OTG standard. The power, ground and signal cables, all made of OFC copper with an OFC silver plating, are symmetrically braided to ensure perfect electrostatic shielding. Finally, to ensure good electrical insulation combined with excellent flexibility, everything...
The DD TC07S cable consists of a male USB-C OTG connector on both sides. The cable features an optimized structure with perfect separation of the data and power conductors to avoid interference. The data conductors are made of pure silver, while the power conductors are made of OFC copper, providing excellent conductivity.
The TC09L from ddHiFi is a USB-C to USB-C OTG cable with angled connectors. One of the connectors is gold-plated for flawless oxidation resistance, while the other is silver-plated for maximum conductivity. To ensure the best possible data transmission, the TC09L separates the power supply and data transfer into two separate cables.
Following on from the TC44B, TC44C and TC44Pro portable DACs for smartphones, DD HiFi unveils the TC44Pro E2, the fourth generation in its range. It features a male lightning connector and a balanced female 4.4mm jack. It features not one, but two CS43131 DACs.
The Gaia 12Th USB digital-to-digital converter or digital interface (DDC) from Denafrips is the result of 3 years of research and development by the brand, which benefits from its extensive expertise in the design of DACs and related technologies.
The Denafrips Hyperion is a totally discrete, balanced power amplifier, benefiting from a particularly well-designed Class AB architecture. The Hyperion is capable of delivering 2x80W into 8Ω or 2x150W into 4Ω, while offering magnificent musicality and dynamics. Each channel is equipped with 4 pairs of output transistors.
This interface converts the signal from a CD player incorporating SAA7030 mechanics, such as CDM2 or CDM4 players, into SPDIF (BNC), Toslink optical and I2S signals. Thanks to its Xilinx DSP and WM8804 receiver interface, this module produces very low jitter.