This 50cm 10-pin flat cable allows the connection of Wondom DSP modules to their I/O ports J1. Convenient, it provides easy access to audio inputs and outputs when you are not using the optional RCA interface module. The connectors are in PH 2.0mm format.
The Wondom AA-AB31282 amplifier is capable of delivering 1x200W of mono power under 3 Ohm. This substantial power reserve allows this amplifier to be associated with demanding speakers or subwoofers, requiring a significant power input. In addition, the module supports BTL (Bridge-Tied Load) configurations and is therefore bridgeable to provide power boost.
The Wondom AA-AB31471 is a small, simple and efficient Class D mono amplifier module. It includes a TPA3110 TI chip to enable it to provide a power of 30W for an efficiency of 90%, as well as a precise sound reproduction.
Mono amplifier module capable of delivering continuous power up to 2500W at 2 Ohm. The module uses an IRS2092 chip to drive 6x MOSFETs (IRFB4227 HEXFET) to provide a large power reserve with high efficiency (up to 91%).
The Wondom AA-AB32192 is a Class D stereo amplifier module based on a TAS5630B amplifier chip and capable of delivering a power of 2x300W under 4 Ohm (THD+N 10%). This amplification chip also allows to reach a very high efficiency, up to 96%.
The Class D Wondom AA-AB32255 amplifier module is based on a TAS5756 chip from Texas Instruments (TI). This allows it to deliver a power of 2x30W at 4 Ohm and this with a high efficiency of 90% and a precise sound reproduction.
The Wondom AA-AB32256 module is a high-performance Class D amplifier with an integrated audio processor. It is based on an amplifier chip TI TAS5754, allowing it to develop a power of 2x30W under 4Ω (THD 10%) with a high efficiency.
This Class D Wondom AA-AB32433 stereo amplifier is capable, thanks to the T-Amp technology, of developing a consistent power of 2x750W at 4Ω with an efficiency of 90%. This large energy reserve allows it to be combined with a large number of speakers, including the most demanding models.
This Class D Wondom AA-AB32516 stereo amplifier is capable, thanks to T-Amp technology, of developing a consistent power of 2x500W at 4Ω with an efficiency of 90%. This large energy reserve allows it to be combined with a large number of speakers, including the most demanding models.
This Wondom AA-AB35281 multi-channel amplifier uses T-Amp technology allowing it to deliver a consistent power of 3x200W under 3Ω with a high efficiency of 94%. This energy reserve allows it to be associated with a wide range of speakers, including demanding models.
This Wondom AA-AB32256 volume control module has been specially designed to accompany the Wondom AA-AB32256 and AA-AB32255 2x30W amplifier modules. It will allow an easy and quick adjustment of the sound level of these modules.
The Wondom AA-AB41161 is a high-performance signal converter, capable of converting an analog signal into an I2S signal. The signal can then be used with a digital audio system in order to obtain a very high quality sound reproduction.
As part of the JAB range, the JAB2 offers a wireless amplification solution with an integrated Bluetooth receiver module that can be powered directly by Lithium batteries. This mono version is capable of delivering 100W of power at 2Ω thanks to a high performance TPA3116 amplifier chip. The module efficiently dissipates the heat from the amplifier thanks...
The Wondom ADAU701 of the APM2 range is a compact DSP (Digital Signal Processor), allowing efficient digital filtering and equalization. Ideal in the context of DIY installation, particularly for the manufacture of active 2.1 speakers, for the acoustic correction of multimedia terminals or for in-wall equalized sound systems, the module is particularly...
Wondom offers a programming card compatible with Sure brand DSPs. This module is essential for programming the DSP and managing the desired signal processing. Working with the free software SigmaStudio, this one will allow you thanks to a graphic interface to adapt the treatment carried out by your DSP. For this the module connects to the PC simply via...
This Battery Management System (BMS) functions as both a power supply and a Li-Ion battery charger type 18650 and has 3 slots and a complete protection system. Very compact, it can power small systems or become a real portable battery. With its MPPT regulators, this module can therefore also operate as a charger, once powered by a voltage of 15-24V. The...
The Wondom BCPB3 is a battery management and protection module, taking advantage of the performance and reliability of the previous models while offering more battery slots. The BCPB3 can thus accommodate 5 Lithium 18650 batteries in series.