This Class D Wondom AA-AB32516 stereo amplifier is capable, thanks to T-Amp technology, of developing a consistent power of 2x500W at 4Ω with an efficiency of 90%. This large energy reserve allows it to be combined with a large number of speakers, including the most demanding models.
This amplifier module from WONDOM is a powerful 3-channel module. Powerful, it delivers up to 2x300W and 1x 500W @ 3 Ohm (THD+N = 10%). This module is based on Class D architecture and T-AMP technology, enabling 97% efficiency while maintaining high sound reproduction quality and low levels of noise and distortion.
This Wondom AA-AB35281 multi-channel amplifier uses T-Amp technology allowing it to deliver a consistent power of 3x200W under 3Ω with a high efficiency of 94%. This energy reserve allows it to be associated with a wide range of speakers, including demanding models.
The Wondom AA-BK31382 is a mono Class D amplifier module capable of delivering no less than 2000W at 2Ω and this with a high efficiency of 90% as well as a high level of detail and very good dynamics.
To facilitate the use and integration of JAB3+, JAB4 and JAB5 modules, Wondom offers a kit containing all the cables and accessories needed to fully exploit their functionalities.
As part of the JAB range, the JAB2 offers a wireless amplification solution with an integrated Bluetooth receiver module that can be powered directly by Lithium batteries. This mono version is capable of delivering 100W of power at 2Ω thanks to a high performance TPA3116 amplifier chip. The module efficiently dissipates the heat from the amplifier thanks...
The Wondom AA-JA32151 JAB 1 is a versatile Bluetooth 2.1 stereo amplifier module delivering 2x15W at 8Ω. This new wondom JAB series offers amplification modules for mobile use. They are optimized for Lithium battery operation. It is possible to use them in mono mode (BTL).
Here is a versatile Bluetooth 5.0 Stereo amplifier module that delivers 2x30W with 8 ohms load. It belongs to the JAB series that offers amplifier modules for mobile use.
This module offers a wide range of connectors to easily connect a module and a power supply with different connectors. Real Swiss Army Knife of power supply connectors.
The Wondom CVA-1100 is a 100W amplifier module, consisting of a power section and an amplifier stage. It is primarily designed for distributed speaker installations, such as background music systems. It is capable of delivering 70/100V RMS continuous power without the need for an output transformer, thus reducing the footprint while improving the...
Wondom presents its GAB8, a high-quality multi-channel amplifier module designed with particular attention to detail to meet the demands of home theater audio applications. Featuring 10 output channels, including 3 dedicated to subwoofers, the GAB8 offers unrivalled versatility for a wide range of audio configurations, with the possibility of integrating...
Wondom's JAB2 V2 is an integrated Class D amplifier module, integrating a DSP and a Bluetooth reception function (aptX HD). This version of the JAB2 V2 is capable of delivering a power of 2x50W.
The Wondom JAB3+ is an amplifier module capable of developing a power of 1x60W, supporting Bluetooth 5.0 (aptX HD) and integrating an ADAU1701 DSP for an all-in-one audio solution. Thanks to the latter, the JAB3+ can be programmed with SigmaStudio and AppControl via an intuitive graphical interface.
The Wondom JAB3+ is an amplifier module capable of developing a power of 2x50W, supporting Bluetooth 5.0 (aptX HD) and integrating an ADAU1701 DSP for an all-in-one audio solution. Thanks to the latter, the JAB3+ can be programmed with SigmaStudio and AppControl via an intuitive graphical interface.
The Wondom JAB3+, part number AA-JA32474, is an amplifier module capable of developing 2x 30W power at 8 Ohm, and featuring Bluetooth 5.0 (aptX HD) functionality as well as an ADAU1701 DSP chip. Thanks to this DSP chip, the JAB3+ is an all-in-one amplifier module that can be programmed with SigmaStudio, AppControl and PC UI when coupled with a Wondom ICP...
The JAB4 is a 4-channel amplifier module featuring Bluetooth 5.0 and an ADAU1701 DSP for an all-in-one audio solution. Based on a TPA3118 amplifier chip, the JAB4 can deliver 30W per channel at 8Ω. Thanks to its DSP, it supports programming via the SigmaStudio PC software.
The JAB5 is an integrated 4-channel audio amplifier board with Bluetooth 5.0 (aptX HD support) and DSP ADAU1701, offering a true all-in-one audio solution. It delivers 4x100W of power at 6Ω. In addition to its Bluetooth input, the JAB5 also has a line input and an I2S input.
This Wondom AA-KA32473 module is a very versatile amplifier, which can be used in a wide range of applications. It has four amplifier chips and is capable of delivering a power of 8x50W. Each chip can be used in PBTL 1x100W mode.