The Audio-Technica ATH-ADX3000 are high-end headphones hand-assembled in Japan and featuring a 58mm diameter dynamic transducer. Its open design has been thought out for a natural rendering thanks to optimized air circulation.
The Fosi Audio Q6 is a small, minimalist, high-performance desktop DAC based on an AKM AK4493SEQ solution and an XMOS XU316 USB interface. It supports high-fidelity sampling rates up to PCM 32bit 768kHz and DSD512, with clean, uncolored conversion for the most balanced sound reproduction.
The SMSL PH-1 is a phono preamplifier for MM turntables, providing a very accurate gain of 46dB to reach a signal level of 1Vrms at output, where most phono preamplifiers provide a gain of only 38-40dB for an output signal of just 300mW. This high gain brings better dynamics, and the overall structure of the device offers ultra-low distortion.
Letshuoer LR-Nebula is a earphones cable made of 6N single-crystal copper, with 0.78mm CIEM connectors and 4.4mm jack termination. It benefits from a balanced structure thanks to six wires, each with ten strands of 0.08mm copper.
These HIFIMAN earpads are designed to fit the brand's Deva and Deva Pro headphones. They are made from soft foam covered in leather and perforated fabric, ensuring good ventilation.
With the Rays, Moondrop is presenting in-ear monitors with USB-C termination. These are based on a pair of drivers combining dynamic and planar magnetic technology to effectively cover the entire frequency band. The cable supplied incorporates a DSP allowing you to create your own custom equalisation, while an NPU chip and a specially-trained algorithm...
Whether you're a music enthusiast or a true audiophile, the Eversolo Play audio streamer takes your music experience to the next level. As versatile as it is powerful, the Play lets you enjoy your music without limits, with exceptional sound quality.
Whether you're a music enthusiast or a true audiophile, the Eversolo Play CD audio streamer and CD player takes your music experience to the next level. As versatile as it is powerful, the Play lets you enjoy your music without limits, with exceptional sound quality.
These stainless steel and graphite polymer spike pads are perfect for use with all types of spikes. They effectively reduce any vibrations generated by your Hi-Fi equipment. They are ideal for small to medium-sized devices.
The Fosi Audio ZP3 is a balanced preamplifier based on NE5532 AOPs. It offers interference-free sound reproduction over a wide dynamic range, minimizing ground loop effects. The ZP3 is ideally suited to audiophile and professional use, given its performance and connectivity, including TRS/XLR combo jack inputs and a balanced XLR output.
TRN BT30 Pro are Bluetooth receivers for IEM headphones with 0.78mm CIEM connectors. These Bluetooth receivers are based on a Qualcomm QCC3040 chip as well as their own amplification thanks to a MAX97220A chip. As a result, they support AAC, SBC and aptX codecs for the most reliable and stable wireless transmission, while delivering a power output of over...
TRN BT30 Pro are Bluetooth receivers for IEM headphones with MMCX connectors. These Bluetooth receivers are based on a Qualcomm QCC3040 chip as well as their own amplification thanks to a MAX97220A chip. As a result, they support AAC, SBC and aptX codecs for the most reliable and stable wireless transmission, while delivering a power output of over...
TRN BT20 Pro are Bluetooth receivers for earphones with 0.78mm CIEM connectors. These Bluetooth receivers support AAC and SBC codecs for the most reliable and stable wireless transmission. Their battery provides up to 13h of use.
TRN BT20 Pro are Bluetooth receivers for IEM headphones with MMCX. These Bluetooth receivers support AAC and SBC codecs for the most reliable and stable wireless transmission. Their battery provides up to 13h of use.
With the DS200, SMSL presents a compact DAC and headphone amplifier with a retro-futuristic aesthetic. It's equipped with a Cirrus Logic CS43131 DAC chip combined with a 3rd-generation XMOS XU-316 chip, enabling it to support sampling rates up to PCM up to 32bit 768kHz and DSD up to DSD256, with a total harmonic distortion of just 0.00019%. Its coaxial,...
With the M3 Plus, Shanling presents a high-definition digital music player, the direct successor to the M3 Ultra, featuring an improved analogue/digital conversion stage, greater output power and an operating system updated to Android 13.
With the M3 Plus, Shanling presents a high-definition digital music player, the direct successor to the M3 Ultra, featuring an improved analogue/digital conversion stage, greater output power and an operating system updated to Android 13.
With the M3 Plus, Shanling presents a high-definition digital audio player, the direct successor to the M3 Ultra, featuring an improved analogue/digital conversion stage, greater output power and an operating system updated to Android 13.
This Neotech NES-3004G speaker cable has an 8-core architecture with central insulation to reduce the capacitive effect. The conductors, with a total cross-section of 4.0mm², have strands of different cross-sections to reduce propagation effects and are made of G-UPOCC, a combination of OCC copper and graphene. This new conductor marks a significant...
The RS9029 from Roseselsa is a portable DAC based on an ESS SABRE ES9039Q2M DAC chip for digital/analogue conversion up to 32 bit 384kHz PCM and DSD256. For furthermore flexibility, it has two jack outputs, one 3.5mm single-ended and one 4.4mm balanced. Furthermore, it offers an output power of up to 300mW at 32Ω, making it compatible with most...
With the EC Zero T, Shanling presents a top-of-the-range CD player featuring R2R digital/analogue conversion and amplification based on JAN6418 power tubes, offering smooth, warm sound reproduction with a typically analogue timbre.
Supravox's 400-2000 EXC is a woofer that takes the membrane of the 400-2000 and combines it with a powerful electromagnetic motor to offer the possibility of adjusting its parameters. The 400-2000 EXC is adaptable to a wide range of loudspeakers, and requires an external power supply between 9V and 15V for 3A.
This Audiophonics pack includes the AP310-PREAMP preamplifier, the HPA-S600NCX stereo power amplifier, Audiophonics Wire XLR connection cables and a trigger cable. It will enable you to set up a high-performance HiFi system, capable of reproducing your music with dynamics and precision. XLR cables enable symmetrical connection, and trigger cables automate...
The xDuoo DM-01 is a DAC and headphone amplifier based on the use of audiophile components integrated within a most singular form factor. It is based on a CS43131 DAC / headphones amplifier chip, an XMOS XU316 USB interface and a 12AU7 tube. It is therefore able to support sampling rates up to PCM 32bit 384kHz, DSD256 and MQAx8, while offering output...
Tectonic's BMR range consists of full-range speakers designed to cover a very wide part of the audible spectrum. For example, the TEBM65C20F-4 features an extended frequency response from 60Hz to 20kHz, as well as wide directivity.
The Questyle M15C DAC headphone amplifier is a high-end-looking device based on audiophile components. It is based on a CS43198 DAC chip and its proprietary “Current Mode Amplification”.
Gustard's S26 is a streamer designed to deliver exceptional audio performance thanks to the meticulous optimisation of each of its components. In fact, everything from the cooling system to the choice of hardware components and the power supply circuit has been designed to ensure smooth operation while reducing noise and jitter in the output signal as...
Gustard's S26 is a streamer designed to deliver exceptional audio performance thanks to the meticulous optimisation of each of its components. In fact, everything from the cooling system to the choice of hardware components and the power supply circuit has been designed to ensure smooth operation while reducing noise and jitter in the output signal as...
The Denafrips Terminator 15Th Plus is a high-performance, symmetrical R2R NOS DAC capable of delivering incredibly pure, rich sound. It benefits from an uncompromising design, conceived to offer the best possible musical experience!
The Luxsin X9 DAC headphone amplifier was developed by Eversolo and benefits from the brand's expertise. It incorporates top-quality components, enabling it to achieve a very high level of performance.
The SMSL M20 DAC headphone amplifier benefits from audiophile components and a most singular form factor. It features no less than 4 CS43131 chips and an XMOS XU316 USB interface, enabling it to support sampling rates up to PCM 32bit 768kHz, DSD256 and MQA.
The SMSL M20 DAC headphone amplifier benefits from audiophile components and a most singular form factor. It features no less than 4 CS43131 chips and an XMOS XU316 USB interface, enabling it to support sampling rates up to PCM 32bit 768kHz, DSD256 and MQA.
iBasso's AMP16 is an amplifier module specially designed to be used with the brand's DAP DX340, providing tube amplification with an impressive 2000mW+2000mW at 32Ω.
The Denafrips Terminator 15Th Plus is a high-performance, symmetrical R2R NOS DAC capable of delivering incredibly pure, rich sound. It benefits from an uncompromising design, conceived to offer the best possible musical experience!
The Ustars Audio C19 is a high-performance receiver streamer capable of transforming a conventional audio system into a connected audio system. To do this, it incorporates a Raspberry Pi Compute Module 4, offering numerous functions while being optimized for audio. It also incorporates an OCXO clock for optimal signal processing.
Khozmo Acoustic presents a 51K stereo shunt attenuator. A shunt stepped attenuator is a simple design where the signal is fed through a fixed series resistor (Rin) and the shunt resistor (Rg), is selected from 48 values ranging from zero to infinity by means of a selector switch.
With the Harmony DSP 8x12, MiniDSP is offering a 12- channel amplifier with Dirac Live-compatible DSP specially developed for use in a car. It incorporates a number of hardware features designed directly for the vehicle environment, such as an isolated on-board power supply, remote trigger input/output and a wired remote control with OLED display for the...
Shanling EL3-600 is a headphone cable designed to deliver a superior listening experience. It is made up of eight braided strands, each incorporating 120 Litz wires of 6N monocrystalline copper. This composition ensures maximum conductivity, enabling your music to be transmitted with exceptional fidelity and clarity.