This affordable Class D amplifier is based on a TPA3251D2 amplification chip, delivering 2x140W at 4Ω with high efficiency. It will therefore have no difficulty driving most speaker models. In addition, it benefits from PurePath Ultra HD technology, maintaining a very low distortion level across the entire frequency range while offering excellent sound...
The power cable Pangea AC-14 is specifically designed for source components, which do not require the same current levels as receivers and amplifiers. The AC-14 delivers more current while offering multiple layers of shielding and other features that ensure extremely clean and noise-free power to your equipment.
The Ayino MR265PRO is a Bluetooth 5.0 transceiver designed to enable two-way audio transmission between wired sources and wireless devices, utilising a Qualcomm CSR8675 chip to support SBC, AAC and aptX codecs in both their HD and Low Latency variants.
The Ampapa / Douk Audio 6.35mm TRS to XLR female cable is a high-quality balanced audio cable designed to ensure perfectly clean and distortion-free signal transmission. It allows efficient connection of HiFi or studio equipment such as DACs, amplifiers, audio interfaces or active speakers thanks to its 6.35mm TRS male jack to 3-pin XLR female connectivity.
The Ampapa 6.35mm TRS jack interconnect cable is a HiFi balanced audio cable designed to ensure perfectly stable, clean, and interference-free signal transmission. It is suitable for audiophiles, studio users, and content creators looking to get the most out of their audio equipment.
The AMPAPA BK1 is a desktop HiFi stand designed to organize and showcase your compact audio electronics. Designed to perfectly accommodate devices from the Ampapa range (A1, D1, Q1), it provides an elegant, robust, and functional solution for building a cohesive and high-performance HiFi system.
The Viablue EPC-2 is an angled 5-pin DIN (SME) to RCA phono cable designed to transmit very low-level analogue signals between a turntable and a phono preamplifier. It features a multi-conductor architecture made of tinned OFC copper, combined with a capacitance of 60pF/m on the signal side, to ensure electrical performance compatible with phono inputs...
The Viablue EPC-2 is a RCA phono cable designed to transmit very low-level analogue signals between a turntable and a phono preamplifier. It features a multi-conductor architecture made of tinned OFC copper, combined with a capacitance of 60pF/m on the signal side, to ensure electrical performance compatible with phono inputs while providing stable signal...
The Viablue EPC-2 is an angled 5-pin DIN (SME) to XLR phono cable designed to transmit very low-level analogue signals between a turntable and a phono preamplifier. It features a multi-conductor architecture made of tinned OFC copper, combined with a capacitance of 60pF/m on the signal side, to ensure electrical performance compatible with phono inputs...
The XCITE XBS50MK is a mounting bracket designed specifically for the brand’s XBS50-4 exciter. It is designed to provide a mechanically stable mounting whilst optimising the transfer of vibrational energy to the host structure. It is built on a glass-fibre-reinforced ABS base incorporating copper inserts, which provide long-lasting protection for...
The FiiO M21 is a stylish Hi-Res portable audio player (DAP) that delivers excellent audio performance. Powered by an 8-core Snapdragon 680 SoC and running Android 13, it ensures fast processing speeds and a smooth user experience, while offering broad compatibility with services such as Tidal, Qobuz, Apple Music, Spotify, and Deezer.
The Ampapa Q1 is a high-performance desktop DAC / headphone amplifier designed for audiophiles seeking versatility, precision, and sound customization. It features a dual DAC architecture combining ESS9039Q2M and AK4493 chips, paired with an XMOS XU316 USB interface for high-resolution audio processing up to PCM 768kHz 32bit and DSD512.
The Douk Audio M1 MAX is a compact Class D stereo amplifier designed to efficiently drive a wide range of passive speakers. It is based on the TPA3255 chip, known for its excellent efficiency and low distortion, allowing it to reach a maximum power of up to 2x250W depending on the power supply used. It is supplied here with a 48V 5A power supply...
With the M3 Plus, Shanling presents a high-definition digital music player, the direct successor to the M3 Ultra, featuring an improved analogue/digital conversion stage, greater output power and an operating system updated to Android 13.
The FiiO KA11 is a portable DAC based on a CS43131 DAC chip for digital-to-analog conversion, along with SGM8262 operational amplifiers to amplify the signal. This compact portable DAC supports high-resolution streams up to PCM 32bit 384kHz and DSD256, and is capable of delivering up to 2x 245mW into 16 ohms.
The FiiO KA11 is a portable DAC based on a CS43131 DAC chip for digital-to-analog conversion, along with SGM8262 operational amplifiers to amplify the signal. This compact portable DAC supports high-resolution streams up to PCM 32bit 384kHz and DSD256, and is capable of delivering up to 2x 245mW @ 16 ohms.
The Furutech FT-SWS-NCF PLUS (R) is a Schuko wall socket that represents a direct evolution of the FT-SWS-NCF model, retaining its fundamental principles whilst enhancing its mechanical and electrical capabilities. It retains the architecture based on cryogenically treated and demagnetised α (Alpha) copper conductors, to which a non-magnetic rhodium...
The power cable Pangea AC-14 is specifically designed for source components, which do not require the same current levels as receivers and amplifiers. The AC-14 delivers more current while offering multiple layers of shielding and other features that ensure extremely clean and noise-free power to your equipment.
These Pangea Premier XL RCA cables feature exceptional craftsmanship, with 100% Cardas Grade One copper conductors—considered the finest copper available—and are shielded by a triple-layer EMI/RFI shield consisting of silver-plated aluminum mylar. Furthermore, these high-purity copper strands are encased in PE tubing (superior to PTFE) that...
The SMSL VMV D3R is an ultra high-performance DAC based on audiophile-grade components. For digital-to-analog conversion, it integrates two ROHM BD34302EKV DAC chips for fully balanced signal processing, combined with an XMOS XU316 USB interface supporting streams up to PCM 32bit 768kHz and DSD512.
The FiiO FT1 Pro is an open-back headphone featuring planar magnetic drivers, designed for high-fidelity audio reproduction. It utilises a 95 x 86mm driver developed in-house to deliver a frequency response ranging from 7Hz to 40kHz. It utilises an ultra-thin 1µm diaphragm combined with a dual-layer aluminium and sapphire structure, simultaneously...
The FiiO K17 is a high-end DAC and headphone amplifier designed to deliver a comprehensive and versatile audio experience, whether for audiophiles or users looking for an all-in-one device for their home office or living room. It stands out for its balanced architecture, high amplification power, and extensive connectivity, making it a top choice in its...
The Furutech CF-C15 NCF (R) connector is an IEC C15 connector featuring pure copper contacts with rhodium plating and Alpha treatment. Its body is reinforced with NCF technology using damping materials based on nano-ceramic and carbon. It supports cables with diameters from 6.6mm to 16mm (maximum cross-section of 3.5 mm² (~12 AWG)).
The FiiO JT1 is a dynamic, circumaural headphone designed to deliver a wide-ranging sound whilst remaining affordable. It features a 50mm dynamic driver to cover the entire frequency range with consistency. Its 32Ω impedance makes it easy to have a power supply available from a variety of sources, allowing for direct use without a dedicated...
The Dunu Mortise is an open-back dynamic headphone designed to deliver wide-band sound reproduction from a 50 mm driver, utilising a carbon fibre diaphragm to combine structural rigidity with low moving mass. It features a high-flux N52 magnetic circuit combined with a W-shaped diaphragm geometry and independent suspension, which stabilises movement...
The LHY Audio RPI Pro is a streamer based on the well-known Raspberry Pi CM4 module, integrating the RoPieee operating system for support of numerous streaming protocols: Roon Bridge, Airplay, Spotify Connect, Tidal Connect, Squeezelite, UPnP, NAA. Moode OS is also available for the RPI Pro if desired.
The FiiO EH13 is a wireless over-ear dynamic headphone based on Bluetooth 6.0 technology. It supports both standard SBC and high-resolution LDAC (24bit 96kHz) codecs. Sound reproduction relies on composite diaphragms with a sapphire coating, delivering detailed audio performance.
The FiiO JT3 is an open-back dynamic headphone designed to deliver high-fidelity sound combined with listening comfort, thanks to its 50mm dynamic driver and PEK+PU (polyetherketone + polyurethane) composite diaphragms, two materials that combine durability and lightness.
The FiiO M27 is a high-end audiophile music player designed to deliver high-resolution audio playback, utilising advanced digital and analogue architecture to ensure stable and detailed sound reproduction. It delivers an output power of up to 5000 mW + 5000 mW at 32 Ω, whilst incorporating dual conversion based on ES9039SPRO DACs, enabling it to...
The LHY Audio RPI Pro is a streamer based on the well-known Raspberry Pi CM4 module, integrating the RoPieee operating system for support of numerous streaming protocols: Roon Bridge, Airplay, Spotify Connect, Tidal Connect, Squeezelite, UPnP, NAA. Moode OS is also available for the RPI Pro if desired.
The FiiO JT7 is an open-back planar magnetic headphone designed to deliver high-quality sound, cutting-edge technology, and listening comfort. Thanks to its 95x86mm speaker featuring an ultra-thin 3µm diaphragm, the JT7 delivers exceptional sound reproduction, with deep, controlled bass, warm mids, and crystal-clear highs—all combining to...
The Muse HiFi M6 Double is a portable DAC with a headphone amplifier designed for the conversion and amplification of high-resolution audio streams on the go. It features a custom ES9039 architecture compatible with 32-bit 768kHz PCM and DSD512, combined with JAN6418 tubes, whilst a dual Accusilicon oscillator ensures low-jitter reclocking to stabilise...
The Muse HiFi M5 Ultra is a portable DAC with a hybrid headphone amplifier, designed for the conversion and amplification of high-resolution audio streams on the go. It is based on a customised ES9038Q2M architecture, compatible with PCM up to 32-bit 768kHz and DSD512, and combined with JAN6418 tubes, allowing for a combination of conversion precision and...
The FiiO FT7 is a high-end open-back planar magnetic headphone designed for exceptional sound reproduction. It is based on a large 106mm planar driver, one of the biggest in its category, combined with an ultra-thin 1µm PET diaphragm. This diaphragm features a patented multi-layer coating made of 24K gold and pure silver, optimizing both...
The Furutech Origin Power NCF-E power cable embodies the full expertise of the Japanese brand in pure transmission, relying on its proprietary Pure Transmission technology designed to optimize every stage of power and signal transfer while reducing contact resistance, EMI and RFI interference.
The VIABLUE NF-S5 is a 5-pin DIN (SME) to RCA phono cable designed to transmit very low-level analogue signals between a turntable and a phono preamplifier. It features silver-plated OFC copper conductors combined with a capacitance of approximately 50 pF/m, to limit load effects on the cartridge and preserve the frequency response from the tonearm...
The Viablue NF-S5 is a 5-pin DIN (SME) to RCA phono cable designed to transmit very low-level analogue signals between a turntable and a phono preamplifier. It features silver-plated OFC copper conductors combined with a capacitance of approximately 50pF/m, to limit load effects on the cartridge and preserve the frequency response from the tonearm output,...
The VIABLUE NF-S5 is a 5-pin DIN (SME) to RCA phono cable designed to transmit very low-level analogue signals between a turntable and a phono preamplifier. It features silver-plated OFC copper conductors combined with a capacitance of approximately 50 pF/m, to limit load effects on the cartridge and preserve the frequency response from the tonearm...
The VIABLUE NF-S5 is a 5-pin DIN (SME) to RCA phono cable designed to transmit very low-level analogue signals between a turntable and a phono preamplifier. It features silver-plated OFC copper conductors combined with a capacitance of approximately 50 pF/m, to limit load effects on the cartridge and preserve the frequency response from the tonearm...