This robust and durable Mennekes Schuko connector (type E/F) allows you to design high-quality power cables at a low cost. Compatible with cables up to 13mm in diameter, it ensures easy installation thanks to its screw-on system, with no soldering required.
With its BOX X4 tube preamplifier, the big brother of the BOX X3, Fosi Audio unveils an affordable and high-quality HiFi device for people wishing to enjoy the warm and rich sound of tube amplification.
The ECC99 tube from JJ Electronics is a 9-pin double triode tube designed to be used as a driver for direct-heated power triodes. However, the ECC99 can also be used directly as a power tube.
The V3 from Fosi Audio is a compact, powerful amplifier that also remains very affordable. Despite its simplicity, the V3 amplifier uses high-quality audiophile components such as a TI TPA3255 amplification chip, Japanese and German Elna and Wima capacitors and DIP8-mounted NE5532 AOPs, giving you the option of replacing them if you want a particular...
The Wondom JAB3-160 is an all-in-one Class D mono amplifier module based on a TPA3118 chip capable of delivering 60W of power into a 4Ω load. It also features a high-performance ADAU1701 DSP, making it suitable for use in a variety of DIY, commercial, and industrial audio applications. When connected to a Wondom programmer from the ICP series (sold...
This small, compact and powerful Fosi Audio ZA3 integrated amplifier has the particularity of being able to operate in both stereo and mono mode. It integrates two TI TPA3255 amplifier chips mounted in DIP8, enabling it to deliver power up to 2x95W or 1x110W under 4Ω (or 2x150W / 1x240W with 48V power supply).
The Keces Ephono+ is a phono amplifier with a separate power supply, designed to provide precise amplification of analogue cartridges whilst isolating sensitive circuits from electrical interference. It utilises a remote power supply architecture incorporating an in-house developed H-Sonic toroidal transformer, whose design minimises noise and stabilises...
The Fosi Audio PH04 is a 4-channel stereo headphone amplifier featuring independent amplifier sections and separate volume controls, allowing up to four people to use it simultaneously.
The Roseselsa CJ20 are in-ear earphones with planar magnetic drivers, designed in collaboration with Andy (AndyAudioVault). They feature a 14.2mm driver to ensure precise transient response and low distortion, thereby preserving the clarity and coherence of the sound across the entire frequency range.
The DSPeaker ShakEQ is the first digital signal processor (DSP) specifically designed to optimize the performance of bass shakers (tactile bass transducers). This innovative device allows you to get the most out of your system by offering precise calibration, powerful processing, and real-time control. Thanks to its dynamic range optimizer, the ShakEQ...
The Shanling MG200 are open-back in-ear monitors designed to deliver an immersive listening experience, combining transparency, balance, and realism. They reproduce a wide, natural soundstage, ideal for audiophiles seeking detail and spatial depth. Thanks to advanced acoustic architecture, premium materials, and precise tuning, the MG200 delivers an open...
The Tonewinner AT-2000 is a high-end AV processor and home-theater amplifier featuring powerful multichannel amplification and a comprehensive audio-video processor designed for immersive systems. Designed around an 11-channel architecture (up to 7.3.4 configuration), it features amplification capable of delivering up to 160W per channel at 8Ω,...
The Dayton Audio Classic B40 bookshelf speakers are passive speakers featuring a 10.16cm woofer and a 2.54cm silk dome tweeter, able to support up to 30W RMS power at a 6-ohm load (60W max.). They have the advantage of being able to be placed anywhere and are ideal for near-field listening.
The Neotech NEI-3002G is a balanced interconnect cable utilising two G-UPOCC composite conductors, a combination of OCC copper and graphene. This new conductor represents a significant breakthrough, both in terms of research and industrial applications. Indeed, the addition of graphene improves the stability of electrical signal transmission at high...
The Keces P9 is a low-noise regulated linear power supply, a direct successor to the P8, designed to provide stable, clean power to sensitive audio components. It delivers up to 5A per rail, with a peak capacity of 7A, utilising an in-house developed toroidal transformer, whose precise winding and carefully selected materials stabilise the voltage whilst...
The Dayton Audio Classic B40 bookshelf speakers are passive speakers featuring a 10.16cm woofer and a 2.54cm silk dome tweeter, able to support up to 30W RMS power at a 6-ohm load (60W max.). They have the advantage of being able to be placed anywhere and are ideal for near-field listening.
The Keces Ewave is a network switch designed for the most demanding systems. It features eight 10/100/1000 Mbps-compatible ports and is based on an in-house circuit design, with routing and layout optimised to minimise electromagnetic interference (EMI/RFI) and ensure consistent data transmission.
The Fosi Audio BT20A PRO is a compact and powerful Class D amplifier, offered at a very resonable price. Its amplifier stage uses a TI TPA3255 chips, capable of developing a power of 225W under 4Ω per channel.
The Fosi Audio TP-02 is a compact and efficient Class D subwoofer amplifier. It features a TDA7498E amplifier chip, enabling it to deliver 220W of power into a 2Ω load, as well as a NE5532 operational amplifier. It can be used with either an active or passive subwoofer, and its low-pass filter allows it to handle frequencies ranging from 20Hz to...
The FiiO M33 R2R is an audiophile portable music player based on discrete R2R conversion, designed to play and process high-resolution audio streams in both portable and stationary settings. It delivers 2x 1100mW into 32Ω, utilising a balanced architecture and a network of resistors calibrated to 0.1% to ensure stable conversion and consistent...
The Fosi Audio BT20A MAX is a Class D stereo amplifier designed to power passive speakers with a high level of control and power in a compact format. It delivers up to 2x85W under 4 Ohm with 32V power supply (or 2x180W under 4 Ohm with 48V power supply), relying on a PFFB (Post Filter Feedback) architecture and a segmented power supply to maintain low...
The iBasso DX270 R2R Ultra is a high-end audiophile digital audio player (DAP) designed to deliver outstanding sound performance on the go. It features a unique conversion architecture combining a 20-bit R2R + 4-bit String hybrid DAC, integrated into a fully differential 8-channel configuration, supported by an FPGA-Master 3.0 controller and ultra-precise...
The iBasso DX270 R2R Ultra is a high-end audiophile digital audio player (DAP) designed to deliver outstanding sound performance on the go. It features a unique conversion architecture combining a 20-bit R2R + 4-bit String hybrid DAC, integrated into a fully differential 8-channel configuration, supported by an FPGA-Master 3.0 controller and ultra-precise...
The PURIFI PTT8.0X04-NAB-02 is an 8-inch (20.32 cm) loudspeaker with a nominal impedance of 8Ω, designed to deliver accurate midrange reproduction whilst maintaining a usable extension in the bass and treble ranges. With a power handling capacity of 300W and extremely low distortion, even at full power, the PTT8.0X04-NAB-02 is the ideal choice of...
The Moondrop Moonriver 3 is a portable USB DAC / headphone amplifier designed to deliver very high-fidelity audio reproduction on the go. As the successor to the Moonriver series, it features an advanced architecture combining dual Cirrus Logic CS43198 DACs, independent amplification stages, as well as an optimized power circuit based on 5 dedicated power...
The iFi Audio iEMatch+ is a passive impedance adapter cable designed to be connected between a source (smartphone, DAP) and earbuds or headphones to reduce impedance and background noise. It offers an output impedance of less than 2.5Ω or 1Ω, helping to minimize response variations associated with sensitive earbuds while maintaining linear...
The ZiiGaat Z-01 is a high-end cable designed for in-ear monitors (IEMs), featuring a 5N single-crystal copper construction. This cable stands out for its LITZ Type 1 construction, which minimizes signal loss and reduces impedance to just 0.4592 Ω, resulting in natural, detailed, and balanced sound reproduction.
The SMSL PS200 PRO is a compact and versatile DAC, designed to deliver exceptional sound quality at an affordable price. Equipped with the latest-generation ES9039Q2M DAC chip and the XMOS XU316 USB processor, this DAC supports high-resolution audio formats up to 32-bit/768kHz PCM and DSD512, as well as MQA and MQA-CD decoding. Its ultra-lightweight...
The Wondom PS-BC12114 BCPB0 1S is a highly efficient and reliable charging and protection module, specifically designed for 26650 Lithium batteries. Featuring a 5V boost circuit, it allows the battery to be used as a power bank to charge mobile devices, Raspberry Pis, or other USB devices.
The iFi Audio UP Travel is a portable Bluetooth receiver-transmitter designed to add wireless functionality to devices that do not have it built-in. It delivers 70mW of output power at 32Ω, utilizing a multi-stage architecture (DAC, amplifier, and Bluetooth module) to minimize internal interference and maintain signal stability during mobile use.
The FiiO K17 is a high-end DAC and headphone amplifier designed to deliver a comprehensive and versatile audio experience, whether for audiophiles or users looking for an all-in-one device for their home office or living room. It stands out for its balanced architecture, high amplification power, and extensive connectivity, making it a top choice in its...
The Ugreen BT505 is a Bluetooth 6.0 receiver designed for wireless audio playback from mobile devices, featuring LDAC compatibility to transmit high-resolution audio. This extends the frequency response from 20 Hz to 40 kHz, covering the entire audible spectrum and beyond under suitable conditions. The unit is powered by a 300 mAh battery offering up to...
The xDuoo Link3 is a portable headphone amplifier DAC featuring a dual ES9039Q2M architecture, designed to convert and amplify high-resolution audio signals on the go. It supports streams up to 32bit 768kHz PCM and DSD512, utilising a 16-core XMOS XU316 USB interface to ensure stable, low-latency transmission, resulting in accurate reproduction with a...
The Aune S18 EVO is a DAC designed to ensure accurate reproduction of digital audio streams, utilising a dual-chip AK4497 architecture combined with global clock synchronisation. It achieves a distortion level of -116 dB and an output noise of 2.6 µV, utilising centralised clock management via PLL to stabilise the timing signal prior to conversion.
The SMSL DL400 is a DAC and headphone amplifier designed to deliver very high-level audio performance in a compact form factor. Thanks to high-quality components such as an ESS ES9039MSPRO DAC chip, as well as a balanced headphone amplification architecture featuring a PLFC (Precision Linear Feedback Circuit), impressive headphone amplification power, and...
The FiiO JA11 is a portable USB DAC designed to handle digital-to-analogue conversion using a compact architecture capable of processing high-resolution audio streams up to 32-bit/384 kHz PCM and DSD128.
The FiiO AIR LINK is a small, portable, and convenient USB Bluetooth transmitter that allows for simultaneous charging and audio streaming. It features a Qualcomm QCC5181 chip and Bluetooth 6.0 technology, enabling the AIR LINK to provide a stable, fast, and virtually latency-free connection. The AIR LINK features a USB-C input and output, making it easy...
The FiiO AIR LINK is a small, portable, and convenient USB Bluetooth transmitter that allows for simultaneous charging and audio streaming. It features a Qualcomm QCC5181 chip and Bluetooth 6.0 technology, enabling the AIR LINK to provide a stable, fast, and virtually latency-free connection. The AIR LINK features a USB-C input and output, making it easy...
The iFi Audio GO Blu Air is a portable Bluetooth DAC and headphone amplifier designed to follow you everywhere. Both practical and high-performance, it features a magnetic clip for easy transport on the go. Powered by its Qualcomm QCC5144 chip dedicated to Bluetooth 5.2, the Go Blu Air offers high-performance audio reception, thanks in particular to its...
The M23 PRO is a Bluetooth 6.0 receiver/transmitter designed to provide two-way audio transmission within a hi-fi system. It utilises a dedicated dual-chip architecture – one chip for reception and the other for transmission – to manage incoming and outgoing audio streams simultaneously, whilst its OLED display allows playback information to...